Dimethyl sulfate for industrial use (3)

6 Inspection rules

6.

6.

6.

6.

6.

6.

7 Marking, packaging, transportation and storage

7.

7.

7.

7.

8.

Dimethyl sulfate has a boiling point of 188.

8.

Skin contact: Take off contaminated clothes immediately, rinse with plenty of running water for at least 15 minutes, and seek medical attention in time

8.

Firefighters must wear gas masks and full-body firefighting suits to put out the fire in the windward direction

8.
4 Leak handling

Quickly evacuate personnel from the contaminated area to a safe area, and immediately isolate 150m to strictly restrict access
.
Cut off the fire source
.
It is recommended that emergency response personnel wear self-contained positive pressure respirators and anti-virus suits
.
Do not directly touch the leakage
.
Cut off the source of leakage as much as possible
.
Prevent entry into restricted spaces such as sewers and flood drains
.
In case of a small amount of leakage, absorb it with sand, stone or other inert materials
.
When a large amount of leakage occurs, construct a dike or dig a pit for storage
.
Cover with foam to reduce steam hazards
.
Use a pump to transfer to a tanker or a special collector for recycling or transport to a waste disposal site for disposal
.

Related Links: Dimethyl Sulfate for Industrial Use (2)