-
Categories
-
Pharmaceutical Intermediates
-
Active Pharmaceutical Ingredients
-
Food Additives
- Industrial Coatings
- Agrochemicals
- Dyes and Pigments
- Surfactant
- Flavors and Fragrances
- Chemical Reagents
- Catalyst and Auxiliary
- Natural Products
- Inorganic Chemistry
-
Organic Chemistry
-
Biochemical Engineering
- Analytical Chemistry
- Cosmetic Ingredient
-
Pharmaceutical Intermediates
Promotion
ECHEMI Mall
Wholesale
Weekly Price
Exhibition
News
-
Trade Service
The EL3154 analog input terminals handle signals
in the range of 4 to 20 mA.
The current is digitized to 16-bit resolution and transmitted (galvanically isolated) to a higher level of automation equipment
.
The input electronics are independent of the supply voltage
of the power contacts.
In the EL3154 with four inputs, the 24 V power contacts are connected to the terminals to connect the 2-wire sensor
without an external power supply.
Power contacts are connected through
.
The signal status of the EtherCAT terminal module is indicated
by the LEDs.
Error LEDs indicate overload conditions and wire
breaks.
Product Information Technology Data Order Information Accessories Document and Download Beckhoff Information System Application NoteMore Related Product Technical Data Housing Data Reaching Apex Technical Data EL3154, ES3154Input Quantity4 (Single-Ended) TechnologySingle-Ended Signal TypeSingle-Ended Signal Current4.
.
.
A 20 mA distributed clock is typical for internal resistance
.
85 Ω + diode voltage input filter limits frequency to 5kHz dielectric strength maximum
.
30 volt conversion time ~ 100 microsecond resolution 16 bits (including symbol) measurement error< ±0.
3 % (relative to full-scale value) galvanically isolated 500 V (E-bus/signal voltage) current consumption power supply contact – current consumption E-bus type
。 Bit width input in 130 mA process image: 16 bytes configuration without address or configuration settings special function standards and compact process image, activatable FIR/IIR filter, limit value monitoring weight approx.
60 g Operating / Storage Temperature -25.
.
.
+60 °C/-40.
.
.
+85 °C Relative humidity 95 %, non-condensing vibration/shock resistant according to EN 60068-2-6/EN 60068-2-27EMC immunity/radiation according to EN 61000-6-2/EN 61000-6-4 Protection
.
Rating/Installation PositionIP20/Variable Pluggable Wiring for All ESxxxx Terminal Approvals/Marks CE, UL, ATEX, IECEx, cFMus Ex mark ATEX: II 3 G Ex nA IIC T4 GcIECEx: Ex nA IIC T4 GcEx tc IIIC T135 °C DccFMus:Class I, Division 2, Groups A, B, C, DClass I, Zone 2, AEx ec IIC T4 GC Technical Data Housing Data Reaching the Apex Housing Data EL-12-8pinES-12-8pin Design Form Compact Terminal Housing with Signal LED Terminal Housing Material with Pluggable Terminal Layers Polycarbonate Size (W x H x D) 12 mm x 100 mm x 68 mm mounted on a 35 mm DIN rail in accordance with EN 60715 Solid conductor with lock with lock marking of BZxxx series by side-by-side mounting double slot and key connection (e) , flexible conductor (f) and ferrule (a): screwdriver driven spring connection section s*: 0.
08.
.
.
2.
5 mm²,st*: 0.
08.
.
.
2.
5 mm²,f*: 0.
14.
.
.
1.
5 mm²s*: 0.
08.
.
.
1.
5 mm²,st*: 0.
08.
.
.
1.
5 mm²,f*: 0.
14.
.
.
1.
5 mm² connection cross-section AWGs*: AWG 28.
.
.
14,st*:AWG 28.
.
.
14,f*:AWG 26.
.
.
16s*:AWG 28.
.
.
16,st*:AWG 28.
.
.
16,f*:AWG 26.
.
.
16 stripping length 8.
.
.
9 mm 9.
.
.
10 mm current load power supply contact I max: 10 A*s: solid wire; st: stranded wire; f: With ferrule