Fire safety requirements for corrosion-resistant operations

Where there is acid, alkali long-term corrosion of industry and other buildings, must be anti-corrosion treatment, such as industrial plating plant, chemical plant. Most of the materials used in the anti-corrosion method are flammable and explosive chemical polymer materials, such as epoxy furan resin, phenolic resin, sulfur, asphalt, coal tar, etc. Curing agents are mostly ethyl glycamine, acetone, alcohol and so on.
(1) sulfur production, storage and construction. Sulfur cooking to strictly control the temperature, when found steaming smoke to remove the fire cooling, if the local combustion to use quartz powder to extinguish the fire. In storage and transportation and construction is strictly prohibited with charcoal, nitrate mixed, to stay away from open flames.
(2) resin class. Resin anti-corrosion materials should be constructed to avoid high temperatures and not to be exposed to the sun for long periods of time. Work sites and storage should be kept away from open flames. The storage should be cool and airy.
(3) curing agent ethyl glycamine. Ethyl amines are commonly used curing agents in resins. This material is at risk of burning in the event of fire, high temperatures and oxidants. Reactions with acetic acid, acetic intoxication, carbon dioxide, chlorine sulfonate, hydrochloric acid, nitric acid, sulphuric acid, silver perchlorate, etc. are very intense. Therefore, in storage and transportation construction should pay attention to: should be stored in a cool and airy warehouse. Keep away from heat sources. It should be isolated from acids and oxidants. When handling, gently load and unload to prevent breakage. In the event of a fire, use foam, carbon dioxide, thousands of powders, sand and foggy water to extinguish the fire.
addition, ethyl triamide is a highly volatile chemical that usually shows yellow smoke when exposed, toxic and irritating. When volatile to a certain concentration in the air, there is a risk of explosion in the event of an open flame. Therefore, in the construction of the use of how much to pour out how much, and to use Maren. Don't show that it's been too long. The rest to be returned to the original container in time, storage, transport will certainly cover well, can not leak gas. The operator asks for contact for a long time and wears a gas mask. Avoid contact with the skin, if contact with the skin should be washed immediately with water.
。