-
Categories
-
Pharmaceutical Intermediates
-
Active Pharmaceutical Ingredients
-
Food Additives
- Industrial Coatings
- Agrochemicals
- Dyes and Pigments
- Surfactant
- Flavors and Fragrances
- Chemical Reagents
- Catalyst and Auxiliary
- Natural Products
- Inorganic Chemistry
-
Organic Chemistry
-
Biochemical Engineering
- Analytical Chemistry
- Cosmetic Ingredient
-
Pharmaceutical Intermediates
Promotion
ECHEMI Mall
Wholesale
Weekly Price
Exhibition
News
-
Trade Service
Five points for attention in the use of biochemical incubators Biochemical incubators are usually used for plant germination, seedling raising, tissue culture, microbial culture, feeding of insects, small animals, BOD determination of water analysis,
etc.
In the process of use, we need to pay attention to the following matters
.
1.
After the temperature of the biochemical incubator is set, the temperature control knob cannot be rotated back and forth for many times, so as to avoid the compressor being started frequently, which will cause the compressor to overload and affect the service life of the compressor
.
2.
Be careful when handling the biochemical incubator, and the angle between it and the horizontal plane shall not be less than 45°
.
3.
When the operating temperature of the biochemical incubator is low, the water in the water pan at the bottom of the box should be poured out regularly
.
4.
If the humidifier is faulty, please repair it nearby according to the warranty point on the humidifier instruction manual
.
5.
When the humidity sensor of the biochemical incubator is in a high humidity state for a long time, condensation will form, that is, the humidity display value will remain high.
The sensor is at room temperature and can be used after it has dried naturally
.
Note: If the humidity of the biochemical incubator is not used for a long time, please empty the water in the box
.
etc.
In the process of use, we need to pay attention to the following matters
.
1.
After the temperature of the biochemical incubator is set, the temperature control knob cannot be rotated back and forth for many times, so as to avoid the compressor being started frequently, which will cause the compressor to overload and affect the service life of the compressor
.
2.
Be careful when handling the biochemical incubator, and the angle between it and the horizontal plane shall not be less than 45°
.
3.
When the operating temperature of the biochemical incubator is low, the water in the water pan at the bottom of the box should be poured out regularly
.
4.
If the humidifier is faulty, please repair it nearby according to the warranty point on the humidifier instruction manual
.
5.
When the humidity sensor of the biochemical incubator is in a high humidity state for a long time, condensation will form, that is, the humidity display value will remain high.
The sensor is at room temperature and can be used after it has dried naturally
.
Note: If the humidity of the biochemical incubator is not used for a long time, please empty the water in the box
.