Four conditions for using infrared moisture analyzer

There are four conditions that need to be satisfied in using infrared moisture analyzer Infrared moisture analyzer gathers near-infrared beams of multiple wavelengths on the surface of the object to be measured, and the near-infrared beams reflected on the surface are received and processed by an infrared optical detection system This infrared optical detection system can process data quickly An embedded super performance micro digital signal processing chip is used to process, store and display the required data It's excellent in degree and stability Only when the following conditions are met when using the infrared moisture analyzer can the correct test results of Zui be obtained 1 The internal and external moisture content should be similar If the product tested by the moisture meter is a relatively uniform particle, or a plate-shaped material (even if the particle is uneven, the shape change is a little big, it doesn't matter); the internal and external moisture content of the product should be very similar Because the infrared testing principle is to test the surface or surface moisture of the material, which cannot penetrate into the interior of the material, if there is a large difference between the internal and external moisture, the infrared principle online moisture meter is not suitable for this product 2 The infrared moisture tester can quickly detect the moisture content of products with small particles or powder materials Most of the surface and internal moisture of materials are basically the same, so in this case, the infrared moisture tester can quickly detect the moisture content 3 For products with the same color, when the color of the materials to be tested changes greatly: if the color of the materials in the same batch is the same, the color of the next batch can be changed by changing channels The online infrared moisture meter can solve this problem; But if the color of the same batch of materials changes greatly, the infrared principle is not suitable - because the color changes greatly, the infrared instrument can not accurately identify the product, even if the nature of the material has no other changes 4 Infrared moisture tester for products with the same formula If the formula of materials changes greatly, the infrared principle can also be tested by changing channels In the same way, it's not suitable if it appears in the same batch.