Four water-based epoxy floor coating thickness differences!

Water-based epoxy flooring is a high-strength, wear-resistant, beautiful, environmentally friendly ground materials, with no seams, solid texture, good drug resistance, good water resistance, corrosion protection, dust protection, convenient maintenance, low maintenance costs and other advantages. According to different use requirements to design a variety of solutions, the following to analyze the thickness differences of water-based epoxy floor materials and some construction methods.
difference in thickness of water-like epoxy flooring materials
1, water-like epoxy flattening flooring:
one of the most common epoxy flooring materials, also known as thin-layer epoxy flooring

. Because it is characterized by thinness, its coating is thin. The bottom coating is generally under 1 mm under construction, in recent years the thickness of the project is more than 0.2-0.5 mm. The thickness of the surface layer is about 0.1 mm, very thin. Others use the spraying process for construction, which reduces the thickness even further.
2, water-like epoxy mortar floor: the
coating is relatively high. The mortar scraping used in the coating for 1-3 mm construction, surface layer with the general floor material construction process, thickness remains at about 0.1 mm. The thickness of the total coating is kept between 1-10 mm.
3, water-like epoxy self-leveling floor:
is also called flow exhibition floor, epoxy self-leveling mortar floor, because it is self-leveling, so the thickness is higher than the first two. Putty layer scraping at 1-3 mm is a common condition. The surface layer remains between 0.7 and 1 mm at self-leveling, much thicker than before. The total thickness of the coating is maintained at around 1.5-10 mm.
4, water-like epoxy anti-static floor:
the construction of its construction to add a conductive path this layer. Other construction methods are basically the same as ordinary flooring. The total thickness is generally 0.2-0.5 mm and it is not recommended to exceed 1 mm.
water-like epoxy flooring material construction methods
First, the treatment of water-like epoxy floor surface
1, the newly completed industrial flooring must go through a certain degree of maintenance before construction. Water-based epoxy in the use of the process than solvent-based epoxy has a greater tolerance for moisture, the substation can only be ground out of dust can be constructed, such as newly poured concrete only need to maintain 7-10 days.
2, remove surface cement slurry, old paint and adhesive garbage.
3, completely remove the surface of the oil.
4, remove the water and let the tide dry.
5, surface cleaning needs to be done with a dust-free sweeper and a large vacuum cleaner.
6, flat surface allows clearance of 2 to 2.5mm, water content of less than 8%, PH value of 6 to 8.
7, the surface of the floor hair, need to be done with a dust-free grinder, and vacuum cleaner thoroughly cleaned.
8, the surface of the floor holes and obvious dents to apply putty to fill the batch scraping, dry, grinding vacuum.
II, water-based epoxy batch scraping coating
1, in the solid (25 degrees C, about 4 hours) after the primer appearance of the choice of two batch scraping coating method, to ensure that the floor wear resistance, pressure resistance, bumping, water, mineral oil, acid-base solution and other functions, and adjust the above-ground flatness.
2, with 80-120 quartz sand, cement and other bone and water-like epoxy batch scraper, as the first way, to be full of mixing and uniform, scraping flat, this road is primarily used to enhance the ground wear and pressure resistance function.
3, sandbag-type dust-free rolling scrub machine to polish the first putty, and vacuum cleaning.
4, with putty powder and water-like epoxy batch scraper, as the second way, to mix and mix well, scrape flat, this road is primarily used to enhance the ground wear resistance and flatness.
5, two do-it-do future, if there is hemp noodles, cracks should be repaired first, and then polished with a flat sander, so that it is flat, and vacuum cleaning.
6, quartz sand use by the site construction personnel according to the specific conditions on the ground to determine.
.