Fully automatic intelligent and efficient pill making machine process

Automatic intelligent and efficient pill making machine process: material preparation ➡ material stirring ➡ out of the strip pill.

➡ The specific operation steps are as follows: 1.
Before starting the machine, clean the roller and the parts in contact with the drug, and do the degreasing and disinfection treatment; 2.
After the drug is concocted, it is dried and crushed into a fine powder, and it passes through 80-100 mesh
screens.
The company's pulverizing equipment supporting the pill making machine has a continuous throwing pulverizer or a 100-1000 gram pulverizer; 3.
According to the nature of the prescription Chinese medicine powder, it is refined into a suitable degree of binder; 4, pill block is also known as medicine, the powder and adhesive mixed into the machine feed mouth, the outlet to remove the nylon discharge nozzle, open the motor out of the material repeated times, the medicine and good after the non-stick hand and soft and hard consistent, the medicine block is placed on the stacking tray for backup; 5, pills: replace the nozzle corresponding to the roller, start the pill rubbing and cutting pill motor switch to adjust the speed of cutting the pill by adjusting the knob, the speed is slightly faster than the speed of the strip, if the size of the slow pill is uneven, fast, the pill will have a hollow, the general operation of the governor between 25-35; 6.
After use, remove the discharge nozzle, exit the screw, clean each part, and install it back in situ after cleaning; 7.
Apply a small amount of grease on the surface of the roller, screw and so on; 8.
Keep the equipment clean and dry
.