General Administration of Quality Inspection: Solvent-based wood coating 3 batches of products are not qualified.

China Coatings Network
News:
State Administration of Quality Inspection recently announced the third quarter of 2015 solvent-based
wood coatings
quality state supervision test results, pass rate of 97.5%, a total of 3 batches of products are not qualified, including Ruiyu (Xiamen) Chemical Co., Ltd. was blasted products are not qualified.
it is understood that the spot check 15 provinces (cities) 120 enterprises produced 120 batches of products, accounting for about 12.0% of the total number of production enterprises in the country, non-conforming product detection rate of 2.5%, compared with the last spot check basically the same. Focus on the product's volatile organic compound (VOC) content, benzene content, toluene, xylene, ethyl benzene content, methanol content, halogenated hydrocarbon content, free diocyanate (TDI, HDI) content, soluble heavy metal content Drying time, pencil hardness (scratch), adhesion, dry heat resistance, water resistance, alkaline resistance, alcohol resistance, wear resistance, yellowing resistance, covering force, double swing hardness, back viscosity, bending test, rowing test and other 21 projects. After inspection, a total of 3 batches of products are not qualified, the main quality problems focus on volatile organic compounds (VOCs), toluene, xylene, ethyl benzene sum, yellow resistance and other items are not qualified.