echemi logo
Product
  • Product
  • Supplier
  • Inquiry
    Home > Coatings News > Paints and Coatings Market > General knowledge of coating: points for attention in spraying of waterborne alicyclic epoxy resin coating

    General knowledge of coating: points for attention in spraying of waterborne alicyclic epoxy resin coating

    • Last Update: 2020-04-03
    • Source: Internet
    • Author: User
    Search more information of high quality chemicals, good prices and reliable suppliers, visit www.echemi.com
    It is suggested that waterborne coatings without VOC and haps can be made from liquid alicyclic epoxy resin and caprolactone polyol with narrow polymerization degree distribution Such coatings can be constructed with traditional equipment and may replace powder coatings What are the points for attention in the preparation of water-based alicyclic epoxy liquid coating? Experts from China epoxy Industry Association recently made a special introduction Traditional liquid coating spraying equipment can avoid the investment of basic equipment necessary for a new powder coating line After modification, these coatings can be diluted with water or increased with cellulose Paint knowledge | precautions for wall paint color selection Recommended introduction: when painting the wall, the owner sometimes has difficulty in choosing what color of the wall paint to paint In fact, there is no ugly color in the wall paint, only the disharmonious color matching The use of wall color contains the knowledge of health Too strong color will stimulate people's perception, make people have a sense of fidgety, affect people's mental health Grasp the basic principles of wall color and paint a colorful space 1、 Wall paint color selection notice 1 Light color is generally used for the top surface Light colors make people feel light, dark colors make people feel heavy Usually, the treatment of rooms is from top to bottom, from shallow to deep For example, the ceiling and walls of rooms are white and Home of coatings: waterborne coatings that do not contain VOC and haps (high-altitude pollution solvent) can be made from liquid alicyclic epoxy resin and caprolactone polyol with narrow polymerization degree distribution Such coatings can be constructed with traditional equipment and may replace powder coatings What are the points for attention in the preparation of water-based alicyclic epoxy liquid coating? Experts from China epoxy Industry Association recently made a special introduction The traditional liquid coating spraying equipment can avoid the investment of basic equipment necessary for a new powder coating line After modification, these coatings can be diluted with water or thickened with cellulose thickener Compared with the traditional diglycidyl ether resin of bisphenol A, alicyclic epoxy has the following differences: it is the main chain of aliphatic group and reacts rapidly with acid, but it does not react with the common curing agent of amine / amide epoxy basically, it does not contain chlorine, the viscosity is 350 centipoise, while the diglycidyl ether resin of bisphenol A is 11000 centipoise, and it also has excellent weather resistance The application of low viscosity alicyclic epoxy in cationic UV coatings has increased significantly There are many reports about the preparation and properties of this kind of 100% solid coatings without "VA", but there are few detailed documents about its application in heat curing coatings In principle, the formulation and technical know-how of cationic UV coating can also be used in the thermal curing system, but they are also different Generally, UV coating does not need spraying construction, so the construction viscosity can be higher than spraying thermal curing coating, and the water in baking cationic coating can be used as the diluent of VOC Caprolactone polyol is an effective active diluent used in solvent based coatings and can accelerate the curing of cationic UV coatings In cationic UV coatings, the hydroxyl group of such polyols can accelerate the curing and cause a certain curing sensitivity to humidity In the heat curing coating, because of the low humidity in the oven, moisture does not inhibit the curing The presence of polyols increases the tolerance of water, so water can be used as a VOC free diluent in the paint formulation composed of alicyclic epoxy and polyols, which is actually a high solid organic paint diluted with water There are two advantages of water dilution: low viscosity without VOC, common and well-known measures of water-based paint can be used to achieve anti sagging and rheological control As the components in the formula are only partially miscible with water, the amount of water that can be absorbed is limited, and it should be avoided to add too much water to cause phase separation Cellulosic thickeners can effectively control sagging in water-based coatings, but it is not clear whether they are effective in 100% solid, water diluted alicyclic epoxy coatings Early work showed that the water diluted 100% solid epoxy had thixotropy when measured by Brookfield viscometer The investigation of various thickeners shows that cellulose thickeners have the best comprehensive properties When heated to 40-60 ℃, the spray gun can be used to obtain the best appearance of the paint film, and low construction temperature can make the solidified paint film produce more orange peel Experts from China Epoxy Resin Industry Association said that the main advantage of powder coating is high coating efficiency High coating efficiency is mainly achieved through the recovery of powder To be equivalent to powder coating, such liquid coating needs some way to recover flying paint Because the paint formula mentioned here does not contain organic solvent, it is much easier to recover If necessary, the water can be used to adjust the water lost in the recovery process by measuring the conductivity Compared with the relatively high baking temperature required for powder paint, the baking temperature required for this kind of paint is lower, which can save energy Another scheme under evaluation is to use "unicarb" method to spray the anhydrous epoxy, polyol and pigment composition formula products The application of "unicarb" method is more efficient than that of powder coating If VOC free coating is not needed, simply add solvent into the above formula Home of coatings is specialized in coatings, diatom mud, paint coating, coating technology, fire retardant coating news and coating, diatom mud, paint coating, coating technology, fire retardant coating decoration knowledge and decoration renderings,
    This article is an English version of an article which is originally in the Chinese language on echemi.com and is provided for information purposes only. This website makes no representation or warranty of any kind, either expressed or implied, as to the accuracy, completeness ownership or reliability of the article or any translations thereof. If you have any concerns or complaints relating to the article, please send an email, providing a detailed description of the concern or complaint, to service@echemi.com. A staff member will contact you within 5 working days. Once verified, infringing content will be removed immediately.

    Contact Us

    The source of this page with content of products and services is from Internet, which doesn't represent ECHEMI's opinion. If you have any queries, please write to service@echemi.com. It will be replied within 5 days.

    Moreover, if you find any instances of plagiarism from the page, please send email to service@echemi.com with relevant evidence.