How art coatings are maintained.

Art paint for decorative design of the main landscape: door court, entrance, TV background wall, colonnades, bar, ceiling can produce extremely elegant effect, and its moderate price is fully in line with the needs of all levels of decoration: hotels, hotels, clubs, clubs, dance halls, nightclubs, resorts and high-end luxury villas, apartments and residential interior wall decoration are optional.
art paint is beautiful, but maintenance common sense must be clear, because the water vapor in the gas and dust dissolved and seeped into the wall material, a long time will lead to the wall color becomes dim. Therefore, the wall needs to be regularly dusted, to keep the wall clean, so that the room will look brighter, the mood will be comfortable

.
Vacuum cleaning of the wall, pay attention to the vacuum cleaner for the suction head, daily discovery of special dirt to be timely wipe, water-resistant wall can be scrubbed with water, washed with dry towels can be;
of course, in addition to dust and other natural glue to the latex paint wall, the family has children's home, the wall is more or less by children's graffiti. As a result, families with water-based interior paint can be careful. Found that the wall of special dirt to be erased in time, water-resistant wall with cloth scrubbing, washing with dry towels to absorb dry. Wipe the water-resistant walls with an eraser, etc., or wipe them gently after you have dried them with some cleaning fluid with a towel. If the graffiti is large, it can be remedied with wall paint of the same color left over from the decoration. Therefore, remind the decoration owners, before coating, you can pay attention to the proportion of paint coating, in case of need. In addition, there are families with children in the market, such as the magic paint brand launched "wear-resistant water anti-graffiti wall paint", can effectively solve the graffiti wall problem.
different areas of latex paint walls, there are different treatment methods. Hard walls and hard ground maintenance is different, because as the wall finish friction less, mainly dust, water drops and other splashes, such as in the hall, it is mainly dust. Cleaning maintenance method is to wipe off the surface of floating ash every day, regular use of fountain fog wax water cleaning and maintenance, wax water has both cleaning effect, but also in the surface layer to form a transparent protective film, more convenient for daily cleaning.
to take care of the bathroom wall, should regularly use alkaline cleaner cleaning, after washing must be washed with clean water, otherwise a long time, will make the surface lose luster. The normal cleaning of all wallpaper walls is to vacuum the walls on a regular basis and replace the vacuum cleaner with a suction head.
1. Climatic conditions (1) in addition to the substrate and the surface of the front paint to clean, dry, but also pay attention to the substrate and air humidity, so as not to affect the substrate humidity of the coating adhesion, generally speaking, in 85% of the relative situation, the substrate can be constructed temperature and ambient temperature is basically the same, so in the case of relative humidity less than 5%, such as the ambient temperature below 5 degrees C, because the curing reaction tends to stop, so can not be carried out construction. When the humidity is higher than 85%, it is easy to produce needle eyes and bubbles, the construction humidity should be less than 85%, and when the surface is affected by rain, it is not ability to paint. Avoid the whitening of the paint film. (2) Solvents evaporate rapidly during construction under harsh conditions above 30 degrees C, and when airless spraying, solvents in the coating evaporate in large quantities between the spray gun and the surface of the coating to form a dry spray. In order to avoid dry spray, the spray gun should be as far as possible to control the distance of the gun, while spraying as vertically as possible, if this measure still appears dry spray, can be added to the appropriate amount of thinner dilution to solve.
2. Coating preparation Due to polyester coating system reaction paint, curing agent and coating liquid mixed, stirred evenly, and began to carry out chemical reactions, therefore, when using the paint should pay attention to how much as needed, and fully stirred evenly, the unused paint can not be reversed back to the original packaging, the finished coating overnight, will cause the viscosity to rise until gelding can not be used.
3. The use of diluent diluents should be different according to different coating methods, the specific coating method can refer to the instructions, in the case of spraying, diluent can be adjusted, but pay attention to viscosity, not too thin.
4. The interval of coating After a paint coating, before the next paint coating, be sure to confirm whether to the prescribed coating interval time, otherwise, can not be applied.
5. Abnormal coating in wet weather will appear pinholes, small bubbles and other anomalies, affecting the anti-corrosion performance of the coating film, should avoid in wet weather construction if the above-mentioned situation, the paint film carefully polished after re-painting.
6. The complete curing of the paint film after the paint film table dry and dry is not the final formation of the paint film, must be placed at room temperature for 7 days, until the paint film is fully cured, before it can be officially put into use.
.