-
Categories
-
Pharmaceutical Intermediates
-
Active Pharmaceutical Ingredients
-
Food Additives
- Industrial Coatings
- Agrochemicals
- Dyes and Pigments
- Surfactant
- Flavors and Fragrances
- Chemical Reagents
- Catalyst and Auxiliary
- Natural Products
- Inorganic Chemistry
-
Organic Chemistry
-
Biochemical Engineering
- Analytical Chemistry
- Cosmetic Ingredient
-
Pharmaceutical Intermediates
Promotion
ECHEMI Mall
Wholesale
Weekly Price
Exhibition
News
-
Trade Service
China Paint Online News Information
Water-wrapped water colorful paint because of its excellent, sprayed finished building products highlighted quaint, beautiful, elegant, expensive, favored by everyone.water package water colorful paint construction process:
1, batch scraping putty powder.
a, batch scraped gray thick with anti-cracking putty powder.
b, batch scraped gray fine with anti-cracking putty powder.
c, batch scraped fine without crack-resistant putty powder.
: Finally be sure to polish putty powder to remove dust.
2, spraying special anti-alkali anti-salt analysis closed primer.
3, the
not divided: transparent primer.
small grid: black primer.
a large grid: first with transparent primer, and so on dry through and then with black primer trace line.
4, paste beautiful paper, spray in the coating (middle styling paint).
5, spray color point
note: immediately tear off the paper, do not wait for the color dot dry and then to tear.
6, spray-cover glossy paintMany people will also have such a question, for the water package colorful paint, how can I spray evenly? Water-packed multicolored paint mostly use spray gun to spray, for operation, but also because of improper use of spray gun caused by uneven distribution of the coating, let's take a look at its solution:
distance is smaller, spray pressure is greater, the product is affected by air pressure, the greater the impact of the coating will be uneven, resulting in the problem of oversh applying thick.
distance, the smaller the spray pressure, the paint is easy to lose, so that the part of the coating spray too little, the application can not reach the specified thickness.
the spray fan surface is in a perpendicular state to the coated surface. When manually manipulating the spray gun, the spray width should not be too large, otherwise there will be an unequidated coating problem.
spray gun should always run parallel to the painted surface, perpendicular to the spray fan surface, the operating rate is unstable, the coating thickness is not average, the running rate is too thin, the running rate is too slow coating is too thick.
in the use of spraying equipment, to do the right strength, the right distance can be, so as to get the desired coating effect. After the construction, some sweeping things also need to be perfected, paint and assistive devices to clean up, after the use of residual paint to block the retention, which is a problem to be paid attention to.
。