How much do you know about the use of thermostatic metal baths?

How much do you know about the use of thermostatic metal baths? The constant temperature metal bath is controlled by microcomputer, with high temperature control accuracy and good parallelism of sample preparation.
It can replace the traditional water bath device and can be widely used in the cultivation, preservation and reaction of various samples.
The application industry covers chemical industry, food safety, quality inspection, environment,
etc.

Compared with the traditional constant temperature water bath, the two are different in the heat conduction mode.
The constant temperature water bath uses water or ethanol as the medium, and is a constant temperature instrument that makes the medium reach an ideal constant temperature through electric heating; constant temperature metal bath It is made of semiconductor material and achieves constant temperature effect through electric heating
.

The constant temperature metal bath has fast and accurate heating, high controllability, and the temperature fluctuation coefficient of the water bath is larger
.

How to use the thermostatic metal bath: Check before starting the machine: the power cord plug has been reliably inserted into the power socket, and the power cord is grounded reliably
.

1.
Turn on the power switch, all indicator lights and digital tubes are on
.

After about 5 seconds, the number displayed on the instant temperature display window (PV) is the instant temperature of the metal module, and the number displayed on the set temperature display window (SV) is the last used set temperature
.

2.
Press the (SET/SET) key once, and the number on the left of the setting temperature display window (SV) will flash.
Use the up and down keys to change the flashing number to the desired value
.

 　　3.
Press the (SET/SET) key again, the flashing digit moves to the right one place, and use the up and down keys to change the flashing digit until it reaches the desired value
.

 　　4.
Press the (SET/SET) key again, the flashing number moves one digit to the right, and also use the up and down keys to change the flashing number until the desired value to complete the temperature setting
.

Or press the (SET/SET) key again to restart the setting from the left
.

 　　5.
8 seconds after the temperature setting is completed, the digital flickering phenomenon disappears, indicating that the local system enters the running state and operates according to the currently set temperature value
.

 　　The above is the relevant introduction about the use of the constant temperature metal bath.
I believe that everyone has a corresponding understanding of this after reading, and operating according to the correct method can ensure the accuracy of the test, and I hope it can help everyone
.