-
Categories
-
Pharmaceutical Intermediates
-
Active Pharmaceutical Ingredients
-
Food Additives
- Industrial Coatings
- Agrochemicals
- Dyes and Pigments
- Surfactant
- Flavors and Fragrances
- Chemical Reagents
- Catalyst and Auxiliary
- Natural Products
- Inorganic Chemistry
-
Organic Chemistry
-
Biochemical Engineering
- Analytical Chemistry
- Cosmetic Ingredient
-
Pharmaceutical Intermediates
Promotion
ECHEMI Mall
Wholesale
Weekly Price
Exhibition
News
-
Trade Service
China Paint Online News Information
True stone paint construction requires the thickness of the coating to be controlled in a certain range, too thick or too thin can not achieve the construction effect, then the outer wall of real stone paint is thick? What is the construction thickness of real stone paint?
the thickness of the real stone paint is too thick to increase the cost of "2-3mm thickness is not too thin?" "No!" When the thickness of the outer wall real stone paint reaches 2-3mm, it can show the perfect imitation stone texture of the coating, in other words, the thickness of the real stone paint 2-3mm can achieve the desired effect from the quality. There is absolutely no need to increase the coating thickness resulting in additional costs.
(see all the pictures on China Paint Online News)
the outer wall of the real stone paint to spray thick?
the thickness of the real stone paint is too thin easy to flower" a little thinner can it? That's not more cost-effective." True stone paint coating is too thin, easy to appear in the background and background color is not the same, resulting in the coating flowering, water whitening and other quality problems. In short, the thickness of real stone paint, the most suitable external wall real stone paint construction thickness, on the one hand, can ensure the fullness of the coating, texture, to achieve realistic imitation stone effect, on the other hand, can be very good to avoid the real stone paint construction process cover and color problems, so the real stone paint industry standard is set at 2-3mm. Coating construction thickness should be well controlled in the prescribed range, the theoretical coating volume of 3.5-4.5kg/m2 (except for coarse sand and special effects), according to this thickness can fully guarantee the texture of the coating.
(see all the pictures on China Paint Online News)
the outer wall of the real stone paint to spray thick?Project real stone paint exterior wall construction steps:
first step to check the air compressor, trachea, spray gun is breathable, if not breathable for three reasons: First, the air compressor broken or did not open. Second, the tracheal entanglement, knotted together. Third, after the use of the spray gun did not clean, resulting in blockage. Solution: Turn on the powered-on air compressor, check the trachea, clean or replace the spray gun.
the second step, check that the stone paint is hard and lumpy. Stone paint can not be in the sun, each time not used up stone paint attention to keep cover, hard or block stone paint will block the spray gun lead to clean the spray gun waste time.
(see all the pictures on China Paint Online News)
the outer wall of the real stone paint to spray thick?
The third step to protect the finished part, wall tiles, glass, balcony, or has been finished area, in these places near the spray paint must remember to use protective paper paste up, otherwise after spraying, clean up abnormal trouble, waste time, if accidentally sprayed also do not have to worry about diluting water with ordinary pine perfume, the proportion of 70 percent of pine perfume with 30 percent of the water with rag wallpaper knife cleaning, pay attention to clean up without two degrees of pollution.
(see all the pictures on China Paint Online News)
the outer wall of the real stone paint to spray thick?
The fourth step began to spray paint, spray gun under the gun pull a few times, pour a small amount of stone paint to try to achieve the ideal density of the model, the general spray gun into the spray material will be fine, pull out the material will be thick, specific requirements of stone paint spray can be adjusted by themselves, adjusted after starting painting, the most common spray paint technology is a step pressure step uniform can be. Pay attention to the lines, the connector should be carefully sprayed, pay attention to the protection of the finished product, and open the valve time.
the fifth step after spraying should immediately tear off the protective paper line paper to tear off, because the stone paint dry after it is difficult to tear off, dry after a period of time may not tear off, the specific method also refers to the pine perfume method. Finally, remember to clean the gun or soak it with water to avoid knotted or damaged, put the tracheal and spray gun together, easy to find the next time, pay attention to their own safety when working, if necessary, wear a mask.
(see all the pictures on China Paint Online News)
the outer wall of the real stone paint to spray thick?
natural real stone paint, rock flake stone paint, texture paint, interior and exterior wall latex paint, interior and exterior wall putty powder, elastic hair paint, water-like granite imitation stone paintProduct advantages:
★ the perfect natural stone appearance, extraordinary style.
★ surface use is unlimited and can be replaced with different spray colors.
★ natural colored sand, never fade, to maintain a long-term aesthetic effect.
★ excellent outdoor durability, strong UV resistance, anti-aging.
★ is fully sprayed with no seams, completely waterproof and resistant to acid rain erosion.
。