How to adjust the linear vibrating screen motor

How to adjust the linear vibrating screen motor: the linear vibrating screen is especially widely used in quartz sand, machine-made sand, limestone, perlite, wood powder, aluminum lime soil, chemical industry, food, metallurgy, building materials, waste recycling and other fields Zui recently asked a lot of questions about how to adjust the motor of the linear vibrating screen Today, Jinhe small editor talked about how to adjust the motor The operation of the linear vibrating screen can not be separated from the vibrating motor The linear vibrating screen is driven by a double vibrating motor The vibration amplitude depends on the exciting force of the vibrating motor If the exciting force of the vibrating motor is reduced or increased, the vibration of the linear vibrating screen can be changed Adjust the specific operation steps of the vibrating motor: open the protective covers at both ends of the two vibrating motors on the vibrating screen, and it will be found that there are two kinds of weight hammers at the end of each vibrating motor inside The greater the excitation force of the motor when the two weight hammers overlap, the smaller the excitation force when the stagger angle is larger The angle of the weight block can be adjusted according to the screening situation to achieve the ideal screening purpose 。 During the adjustment, only the external counterweight is adjusted, and the internal counterweight cannot be adjusted (it is used for reference calibration, if the excitation force of the motor is disturbed), remember that the four end faces of the two motors should be adjusted uniformly, and if you don't understand, you must consult Jinhe's staff If the adjustment is not good, the service life of the shale shaker will be affected