How to better realize the inner wall coating construction process?

With the continuous improvement of our living standards, our requirements for home decoration are getting higher and higher, a good decorative effect in addition to the quality of decorative materials have certain requirements, at the same time construction also plays a vital role. Today, the small editor will introduce the construction process of interior wall coating.In the process of decoration of our home walls, many of the use of interior wall paint, interior wall paint construction advantages are not complex, very simple, at the same time with different colors, decorative wall is very simple style., the inner wall coating construction materialsthe inner wall coating level should be dry, no dirt. To carry out cement wall maintenance work for more than a month, humidity should be less than 6%, wood surface humidity should be less than 10%, the construction of the wall without seepage cracks and other phenomena; Clean all the adhesives on its surface as well as unclean booty.2, interior wall paint construction conditions itself is water-based paint, so the conditions in the construction and maintenance requirements are also very high, the construction and maintenance process should be higher than 5 degrees Celsius, the environment should have humidity should be less than 85%, so that better to form a membrane, usually, the maintenance time should be seven days, the temperature should be kept as low as possible, while a little longer, the outer wall construction process due to the weather and so on External objective factors to think, in the latex paint brush before this time, within 12 hours can not have rain, and we paint construction maintenance humidity can not be too low, especially the two-component reaction coating, when in a low temperature state, will make the formation of the film become very slow, the time required will grow, and after painting, 24 hours between can not rain, to prevent paint film will be damaged by rain washing.Thye, inner wall coating construction process to ensure that the effect of coating, we should have a more refined operating level, to ensure that we will be the construction process of the substrate is not dirty and it is very strong, in accordance with the instructions to carry out construction, in the premise of meeting the conditions of paint construction To ensure that the diluted serving size is accurate, because when the proportion of dilution is greater than, it is easy to occur paint does not cover the bottom, at the same time, if the coating is shiny will also make the gloss drop, the bottom surface to ensure its smooth, with good construction tools, in the actual construction process in the process of brushing the ceiling first.Before carrying out paint construction, we must mix it evenly according to the instructions, if we are using the same color but its model is not the same paint and, when painting on the same paint surface, we should choose a larger container to mix them together and stir them evenly, so that the whole can be well docked between, not with a large color difference.