-
Categories
-
Pharmaceutical Intermediates
-
Active Pharmaceutical Ingredients
-
Food Additives
- Industrial Coatings
- Agrochemicals
- Dyes and Pigments
- Surfactant
- Flavors and Fragrances
- Chemical Reagents
- Catalyst and Auxiliary
- Natural Products
- Inorganic Chemistry
-
Organic Chemistry
-
Biochemical Engineering
- Analytical Chemistry
- Cosmetic Ingredient
-
Pharmaceutical Intermediates
Promotion
ECHEMI Mall
Wholesale
Weekly Price
Exhibition
News
-
Trade Service
China Coatings Network
News:
latex paint
is a synthetic resin emulsion as a base for the addition of pigments, fillers and a variety of additives made of a class of
water-based
. According to the production raw materials, latex paint mainly has polyvinyl acetate latex paint, acetate latex paint, pure acrylic latex paint, phenyl propylene latex paint and other varieties; Here's how to brush latex paint? What are the precautions for brushing latex paint:
1, batch putty, large area full batch of putty (ratio, white cement: 107 glue s 10:4) once, after drying with sandpaper polishing. Large area again full of white cement putty (ratio, white cement: 107 glue:
talc powder
s 10:4:2), to ensure that the entire plate is flat, and then fine grinding.
2, latex paint must be dumped in a larger container before use, fully stirred, so that it is uniform, the use of the process still need to continue stirring, in order to prevent uneven thickness, filler lumps or color incogencies.
3, when the thickness is too large or storage of a longer "thickening" phenomenon can be reduced by stirring consistency is fluid-like re-use, can also be mixed with no more than 8% of the
coating
thinner, but can not be arbitrarily added water, so as not to affect the strength of the coating film.
4, according to the predetermined construction method, should use the same batch number, a sufficient preparation, so as not to color and consistency and affect the decorative effect, to the construction inconvenience.
5, latex paint storage time should not be too long, generally not more than six months of factory date, coating sealing should be 0-40 degrees C.
1. The general law of brushing is from left to right, from top to bottom, first in and out, first difficult and then easy.
2. Paint brush should run fast and slowly consistently, with uniform force to ensure uniform coating.
3. Brushing should not be applied back and forth too many times to prevent foaming or leaving brush marks.
4. Brush on top of the oil to be less, the action should be fast, thin brush many times, in order to prevent hanging.
. Proper ventilation at the construction site should be ensured.
6. The brush should be immersed in solvents or washed to dry at the end of the brush or during the middle rest.
