-
Categories
-
Pharmaceutical Intermediates
-
Active Pharmaceutical Ingredients
-
Food Additives
- Industrial Coatings
- Agrochemicals
- Dyes and Pigments
- Surfactant
- Flavors and Fragrances
- Chemical Reagents
- Catalyst and Auxiliary
- Natural Products
- Inorganic Chemistry
-
Organic Chemistry
-
Biochemical Engineering
- Analytical Chemistry
- Cosmetic Ingredient
-
Pharmaceutical Intermediates
Promotion
ECHEMI Mall
Wholesale
Weekly Price
Exhibition
News
-
Trade Service
1.
Open the door of the machine room and turn off the main switch power supply in the high and low temperature test box
.
2.
To the part where the drain valve is turned, the water will be drained back to the lower water tank through the return water pipe and all the water will be drained back to the lower tank
.
3.
Pull out the return water pipe, and pull up the tee connector of the water motor power plug and the water outlet of the suction pump motor
.
4.
If there is water exposed at the inlet and outlet of the suction pump motor, it is a normal condition.
Press the inlet and outlet of the suction pump to quickly throw away the water in the lower liquid bucket
.
5.
Various parts can be cleaned behind the high and low temperature test chamber
.
6.
After cleaning, put the liquid bucket back, and plug the tee connector of the power plug of the suction pump motor and the water outlet of the suction pump motor back into the water supply pipe
.
7.
Open the lid of the high and low temperature test box and pour in pure water or pure water, and turn the drain valve to the closed position
.
8.
Turn on the main switch power supply to the top, the water will be fully automatic from the liquid bucket, and the suction pump motor will be pumped to the various components of the water system software
.
Open the door of the machine room and turn off the main switch power supply in the high and low temperature test box
.
2.
To the part where the drain valve is turned, the water will be drained back to the lower water tank through the return water pipe and all the water will be drained back to the lower tank
.
3.
Pull out the return water pipe, and pull up the tee connector of the water motor power plug and the water outlet of the suction pump motor
.
4.
If there is water exposed at the inlet and outlet of the suction pump motor, it is a normal condition.
Press the inlet and outlet of the suction pump to quickly throw away the water in the lower liquid bucket
.
5.
Various parts can be cleaned behind the high and low temperature test chamber
.
6.
After cleaning, put the liquid bucket back, and plug the tee connector of the power plug of the suction pump motor and the water outlet of the suction pump motor back into the water supply pipe
.
7.
Open the lid of the high and low temperature test box and pour in pure water or pure water, and turn the drain valve to the closed position
.
8.
Turn on the main switch power supply to the top, the water will be fully automatic from the liquid bucket, and the suction pump motor will be pumped to the various components of the water system software
.