How to deal with the loose cover rolling when using the filling and capping machine

Filling and capping machine It is suitable for small dose tincture water, sugar filling and capping processes in pharmaceutical factory Because the filling machine is an automatic machine, the dimensions of easy pull bottle, bottle pad and bottle cap are required to be unified The whole machine can complete the bottle handling, bottle conveying, quantitative filling, capping, delivery and capping processes All parts in contact with drugs are made of 316L stainless steel or PTFE, with no bottle filling and frequency conversion Speed regulation and other functions So how to use it 1 Put the bottle with the liquid filled and the lid on the lower tray, lean on the V-shaped support block, hold the bottle with one hand, and tighten the handle backward and downward with the other hand At this time, the tray holds the bottle and lifts it up until the cap and the capping head are pressed tightly 2 When the bottle cap and the capping head are pressed tightly, the three capping tool heads that rotate continuously rotate for several turns, and then the bottle cap is pressed tightly 3 Push the handle forward to make the cover return to its original position with the tray, and the whole operation process is completed Repeat the above operation for each bottle cover in the future When the tightness of the lid is not good, the capping head can be adjusted Because the capping machine has multiple capping heads, the upper capping head can be selected according to the size of different bottle caps The specific conditions of the filling and capping machine are as follows: 1 If the lid is not tightly rolled, the lock nut of the capping head can be unscrewed and the upper capping head can be screwed out according to the counter clockwise direction, and then the fixed nut can be locked 2 The cap is too tightly rolled, and there is a phenomenon of screwing off the cap The lock nut of the upper rolling cover head can be unscrewed and screwed into the upper rolling cover head in a clockwise direction, and then the fixed nut can be locked 3 The lower edge of the bottle cap is not tightly tightened, and the eccentricity of the three rolling heads can be properly reduced according to the actual situation If the retraction is too tight and there is bottle crushing phenomenon, the eccentricity of the three tool heads can be properly adjusted It is very important to use the filling and capping machine to pack this piece, because it is related to the drug properties and quality If you are careless in this area, the consequences will be very serious, so you must attach great importance to the packaging area.