How to deal with the split joints of real stone paint on exterior walls?

The exterior wall paint real stone paint division technology determines the overall aesthetics of the wall, so how to construct the division?

When is the real stone lacquer split seam usually handled? What material is used?

After the putty construction is completed, after the alkali-resistant sealing primer is applied, the splitting process can be carried out.

Generally, a paper tape seam (minimum width of 9mm) should be kept at the two-color joint to keep the line clear and straight.

 Note: First, it is not allowed to brush the seams after the paint is applied, which will not only be uneven, but also easily pollute the wall; second, it is not possible to use ordinary paint to paint the seams, which will cause discoloration, peeling, and peeling.

②Tear the paper tape after the paint film is dry, which is inefficient and difficult.

③Special attention: it cannot be torn off when it is half-dry, so it is easy to tear the lower skin and destroy the effect of the formed wall.