How to detect oxygen content in centrifuge of pharmaceutical factory? Austrian optical oxygen analyzer for the detection of oxygen content in corrosive gases

How to detect oxygen content in centrifuge of pharmaceutical factory? Only the best solution of Austrian optical oxygen analyzer can be used to detect the oxygen content of corrosive gas How to detect the oxygen content in the centrifuge? Five horizontal centrifuges contain inflammable and explosive materials such as c12h27n in the feeding, which are filled with nitrogen for protection during feeding For safety reasons, it is necessary to install an oxygen content analyzer to monitor the oxygen content in the inner cavity in real time to prevent explosion How to choose Oxygen Analyzer? Answer: as a production equipment, centrifuge has been widely used in medicine and pesticide industry However, due to the particularity of the occasion, process and medium used in these industries, centrifuge has explosion-proof requirements, so it is necessary to analyze the oxygen content in the inner chamber At present, the common detection methods in the industry are nitrogen replacement protection and simple configuration of oxygen content detector, most of which are brought by equipment manufacturers However, because the feeding medium is mostly methanol, ethanol, toluene, acetone, cyclohexane and other organic solvents, if there is no perfect pretreatment device for drying, filtering, removing lipids and other steps, it is very easy to corrode the oxygen detector, and its service life is only one week or even shorter Frequent replacement not only increases enterprise cost, but also harms production safety How to detect oxygen content in centrifuge of pharmaceutical factory? Only Austrian optical oxygen analyzer can be used to detect the oxygen content of corrosive gas At present, the common test method in China is to use electrochemical oxygen analyzer with pretreatment system, which is feasible in theory, but no one has done well Generally, the electrochemical oxygen sensor is broken in one month, which is better for half a year The reason is that the pretreatment system can not remove the acid gas in the centrifugal machine, and the electrochemical oxygen sensor can not bear it at all There are also manufacturers using laser oxygen analyzer, price between 150000-200000, pit die is expensive, you have to choose How to detect oxygen content in centrifuge of pharmaceutical factory? Only the Austrian optical oxygen analyzer can be used for the detection of the oxygen content of corrosive gas The Austrian optical oxygen analyzer is installed on-line with a direct plug-in type The price is tens of thousands of RMB It can be used for a long time, has good stability, and saves troubles such as pretreatment Compared with electrochemical oxygen analyzer and laser oxygen analyzer, it has an irreplaceable position It can be said that Austria tecsense optical oxygen analyzer is the best choice for the centrifuge oxygen content analyzer of pharmaceutical factory, and it is decided without hesitation Using a new generation of Austrian tecsense optical oxygen analyzer can be said to be a good choice with a combination of cost performance How to detect the oxygen content in the centrifuges of pharmaceutical factories? For the detection of oxygen content of corrosive gas, only the Austrian optical oxygen analyzer is the best solution When the oxygen content in the centrifuge of pharmaceutical factory exceeds the standard, it is easy to explode Because the centrifuge contains corrosive gas of acid gas, it is not advisable to use the electrochemical oxygen analyzer The probe must be changed in half a year better than a month It is hard to use It is recommended that you use the Austrian t The optical oxygen analyzer imported by ecsense has high cost performance and has been widely promoted in pharmaceutical factories all over the world The necessary oxygen analyzer for centrifuge oxygen content monitoring -- Austrian tecsense optical oxygen analyzer How to detect oxygen content in centrifuge of pharmaceutical factory? The detection of oxygen content of corrosive gas can only be performed with the best solution of Austrian optical oxygen analyzer How to detect oxygen content in centrifuges of more pharmaceutical factories? The best solution of Austrian optical oxygen analyzer can only be used to detect the oxygen content of corrosive gas Please call yingxiao instruments (Shanghai) Co., Ltd directly for information