How to do a good job of daily maintenance of high and low temperature all-in-one machine?

high and low temperature integratorthe use of fully enclosed pipe design, high-efficiency plate heat exchanger, reduce the demand for hydrothermal fluid, while improving the thermal utilization rate of the system, to achieve rapid rise and fall temperatureThermal media in a closed system, with expansion containers, expansion containers in the thermal media do not participate in the cycle, regardless of high or low temperature, expansion tank temperature is normal temperature to 60 degrees C, can reduce the risk of heat media in operation to absorb water and volatilizationhigh and low temperature integrated machine is applicable to more industries, high-pressure reactor hot and cold source dynamic thermostrthertheme control, double-glazed reactor hot and cold source dynamic thermostrthertheme control, micro-channel reactor cold and heat source thermostrtherther control, small thermostat control system, steaming system control, material low temperature high temperature aging temperature test, combination chemical cold source heat ingon thermostat control, semiconductor cooling equipment heating, vacuum heating and other industries can be usedhow to do a good job of daily maintenance of the high and low temperature all-in-one?this body belongs to electronic instruments and equipment, to regularly clean, dust removal, regular power, to prevent moisture damage, to regularly carry out site testing, performance testing, understand its technical status, to ensure that the equipment is often in good working condition, internal use of rechargeable batteries to maintain its data or program equipment, to regularly power upall-in-one machine maintenance should often carry out cleaning, lubrication, rust prevention, dust, moisture, anti-corrosion and other maintenance workAnti-sinking filter at least once half a month cleaning, to regularly maintain cleaning, improve the effect of coolingThis is not only the need to improve efficiency and effect, but also the need to prevent overload induced fire and damage equipmentthe thermal medium of the device in a closed system, with expansion container, expansion container in the thermal medium does not participate in the cycle, whether high or low temperature, the expansion tank temperature is normal temperature to 60 degrees C, can reduce the risk of the thermal medium in operation to absorb water and volatilization