How to maintain and maintain biological fermentation tanks

Kehao company (KEHAO) design and production of pilot joint fermentation tanks are composed of seed fermentation tanks and main fermentation tanks, two fermentation tanks with a control system, installed on a platform, two fermentation tanks can work independently, can also work at the same time.
the use of mechanical stirring system, agitator speed is not adjustable, fermentation temperature, PH, dissolved oxygen (DO), filling, defouling and other parameters automatic control, automatic recording, storage, printing, equipment with good stability and easy to operate and so on.
, how can biological fermentation tanks be maintained and maintained? 1, such as the air infleter and water pipe connector leakage, when the rotary joint does not solve the problem, should be added or replaced filler.
2, pressure meters and valves should be checked regularly, if there is a fault to be replaced or repaired in a timely manner.
3, cleaning the fermentation tank, please brush with a soft brush, do not scrape with a hardware, so as not to damage the surface of the fermentation tank.
4, supporting instruments should be checked once a year to ensure normal use.
5, electrical appliances, instruments, sensors and other electrical equipment is strictly prohibited direct contact with water, steam, to prevent moisture.
6, when the equipment is discontinued, it should be cleaned in time to drain the remaining water from the fermentation tank and the pipes, and release the fermentation tank lid and hand hole screws to prevent deformation of the sealing ring.
7, operating platform, thermostat water tank and other carbon steel equipment should be regularly (once a year) brush paint, to prevent corrosion.
8, often check the reducer oil level, such as oil is not enough, need to increase in time.
9, regularly replace the reducer lubricants to extend their service life.
10, if the fermentation tank is not used for the time being, the fermentation tank needs to be emptied, and drain the remaining water in the tank and in each pipe.