How to maintain the air blast drying oven?

Blast drying oven is the equipment used for drying, baking, melting wax and sterilization in industrial and mining enterprises, laboratories, scientific research institutions, etc the instruments and equipment used in the laboratory need to be maintained regularly How to maintain the blast drying oven? In fact, the maintenance of the air blast drying oven is similar to the instruments and equipment in the laboratory such as the circulating water vacuum pump, glass reaction kettle and rotary evaporator Here, the rotary evaporator manufacturers make a specific summary on the maintenance of the air blast drying oven, as follows: 1 It is the same as all the instruments and equipment used in the laboratory, that is, grounding The grounding wire of the power socket shall be made according to the regulations, and all the power supply voltage shall be consistent; 2 When the air blast drying box is to be overhauled, the power shall be turned off; when the air blast drying box is used, the electric appliances in the space on the left side of the box shall not be touched by hands 3 Attention shall be paid to the setting of power cord, which shall not be attached to metal objects or placed in the environment with too high temperature or humidity, so as to avoid the occurrence of leakage caused by rubber aging 4 Special attention must be paid to this point in the use process When placing the items in the box, it is not allowed to squeeze too much, and there is no space for air convection, so it is easy to cause that the moist air cannot be discharged in time 5 After each use of the air blast drying oven, all the power supply shall be cut off, the inside and outside of the oven shall be kept clean and tidy, and it shall be checked regularly This article is provided by Kodak, the manufacturer of rotary evaporator If it is reproduced, please indicate the source.