How to maintain the semi-automatic pelletizer?

The semi-automatic pill making machine is a new type of electric pill making machine, which is a special pill making equipment for the pharmaceutical industry The device has the advantages of faster speed, higher efficiency and better pill making effect The finished pill has the characteristics of uniform size, smooth and full particles The machine itself has the function of polishing and drying, which is convenient and practical Several points need to be paid attention to in the use of the semi-automatic pelletizer, as follows: 1 The semi-automatic pelletizer is suitable for the ambient temperature of - 5 ℃ to 40 ℃, and the relative humidity is less than 90% There is no conductive dust and corrosive metal gas around, and it is placed in a ventilated and clean position 2 During operation, there shall be no other irrelevant items on the worktable The pelletizer shall be placed on a stable platform When the power supply voltage is confirmed, the power supply shall be close to the platform, and the power socket shall have a reliable grounding wire It is strictly prohibited to pull the power cord forcibly to prevent man-made overturning, damaging the pelletizer and other accidents 3 After the semi-automatic shot making machine is used, remove the socket head cap screw, divide the upper part and the lower part with the roller as the boundary, remove the four rollers, scrub them with medical alcohol, and then install and reset them 4 When scrubbing with medical alcohol and changing the pelletizing roller, the main power must be cut off and the power plug must be pulled out to avoid personal accidents 5 During the operation of semi-automatic shot making machine, it is strictly prohibited to contact the shot making roller with hands, brushes or other tools to avoid hurting fingers It is strictly prohibited to process shot making by electrifying under the protection of no upper cover and gearbox cover, so as to avoid unnecessary personal accidents 6 If the power cord is damaged (such as exposed bare wire), special power cord must be used Purchase and replace it in the maintenance department of the local office If the switch or socket fails, it must be stopped It is strictly prohibited to change the line and continue to use The beginning or socket of the same specification shall be replaced in time to avoid mechanical and personal accidents 7 The grinding equipment matched with the semi-automatic pill making machine can be LH-08B running water type traditional Chinese medicine grinding machine or XFB-400 to 500 g swing type traditional Chinese medicine grinding machine 8 When the water pill coating device is not used, it can be removed and washed directly Turn it clockwise and pull it out Put it in a reliable and clean place for use, and apply a small amount of clean and anhydrous edible oil on the exposed part of the water pill coater to prevent floating rust It is forbidden to wash the whole machine or electric heater directly with water When the machine is not in use, it must be placed in a dry, clean and ventilated place During the use of electric heater, it is strictly prohibited to contact with water to prevent electric conduction and personal accidents such as electric shock