How to operate the fast pelletizer correctly

This machine is driven by machinery Under the action of friction, the drum rotates Powder materials are discharged from the screen hole under the positive and negative rotation of the rotating drum and sent out of the machine The particle size and density can be controlled to a certain extent by adjusting the tightness of the screen and the rotation speed of the drum So, how to operate the fast pelletizer correctly? Let's learn about it today I preparation before operation 1 Material preparation: the dry powder shall be mixed with appropriate amount of water for even mixing, and the wet material can be dried properly, and the material is in block shape, so processing is not required 2 Machine preparation: remove the glass cover of the material barrel, replace the appropriate screen, adjust the thorn wheel in the hand wheel to the appropriate position, run the machine for 1-2 minutes without any abnormality, and then start the machine II Use method: start the machine, pour the mixture into the hopper, and squeeze the material to form particles through the screen by the swing action of the rotary drum III precautions: 1 If the powder in the powder hopper can not be stopped, it is not allowed to shovel by hand, so as to avoid hand injury accident Bamboo shovel or parking shall be used 3 If the crushing block is crushed, it should be added gradually, and it should not be filled up, so as to avoid too much pressure and make the screen vulnerable 4 Install the glass cover of blanking drum before operation to prevent particles from coming out.