How to operate the magnetic reactor correctly

Teach you how to operate the magnetic reaction kettle correctly 1 Avoid damaging the magnetic stirrer on the top of the kettle cover when the kettle body is transported and installed in place The reactor operation room shall be well ventilated and meet the explosion-proof requirements Install the equipment on the bracket, level the four supports with inclined iron, and keep the equipment vertical to the ground For the equipment with inflammable and explosive reaction medium, anti-static grounding device shall be installed to eliminate the potential electrostatic hazard 2 Select the matching sealing gasket according to the reactor medium, design pressure and design temperature The sealing gasket shall be installed between the kettle body and the kettle cover, magnetic stirrer and the kettle cover, and each pipe flange, and the bolt shall be tightened again When tightening the bolts, the bolts shall be tightened evenly according to the principle of diagonal distribution, and shall be tightened in 2-3 times to prevent the bolts from leaning up, damaging the sealing gasket and affecting the sealing effect 3 Add No.13 compressor oil or No.11 cylinder oil to the oil tank of the reducer, the oil level shall be added to the specified mark, and the lubricating oil shall be changed regularly 4 If it is a high-temperature and high-speed magnetic stirrer, add lubricating oil into the bearing oil filling port before use, and regularly add lubricating oil from the oil filling hole in the later use process Mr Tan xuezhou, sales director, welcome your inquiry! Welcome to visit our company!