How to shave putty quickly and well? It's that simple!

Scrape putty, I believe everyone has heard of it.
It is one of the indispensable processes before painting the interior wall decoration.
Use putty powder to fill the uneven part of the base surface, and make the wall surface a smooth and smooth com" href="http://">coating online coatingol.
com .
So, how to shave putty quickly and well? Below, the editor brings you pictures of the putty scraping technique, I hope it will be helpful to my friends.

1.
Putty powder

First of all, we must buy good quality putty, which is an important prerequisite for good putty.
Excellent putty powder brands include Meichao, Lions, Aijiabao, Black & Decker and so on.

2.
Proportioning

Pay attention to the ratio of putty and water to mix a good quality putty mixture.
Put an appropriate amount of water in the barrel according to the product proportioning table, start to pour an appropriate amount of putty powder, and then replace the mixing head with an electric drill, and power on to mix evenly.

3.
Grassroots treatment

Before scraping putty, use a clean broom and putty knife to clean the wall as a whole.

4.
Scrape putty

I started to scrape putty.
The skill of scraping putty quickly and well is very important.

5.
Scrape putty technique

You need to scrape the putty three times.
Remember that the first step must wait until the last step is dry before brushing the second time, otherwise the wall will be peeled off.

6.
The thickness of scraping putty is best controlled at about 2 mm, too thick or too thin will not reach the standard.

7.
Special attention should be paid to the details.
The vertical and horizontal parts should be polished with light, and the treatment of the yin and yang angles must meet the requirements, otherwise the finished product will not be effective.

8.
In the construction process, try to avoid direct cold wind blowing.

The article concludes: The picture about the putty scraping technique is here for everyone.