How to use syrup filling machine

How to use syrup filling machine? Syrup filling machine is suitable for small dose tincture water, sugar filling and capping processes in pharmaceutical factories The whole machine can complete the bottle management, bottle conveying, quantitative filling, capping, capping and capping processes All parts in contact with drugs are made of 316L stainless steel or PTFE, with functions such as no bottle filling, frequency conversion and speed regulation Syrup filling machine is an automatic machine, so easy to pull bottle, bottle pad, bottle cap size are required to be unified Before starting the machine, you must first use the handle to turn the machine to see if there is any abnormality in its rotation, and then start the machine after it is determined to be normal When adjusting the machine, the tools should be used properly It is strictly prohibited to use excessive tools or use excessive force to dismantle parts to avoid damaging the parts or affecting the performance of the machine When the machine is adjusted, the loose screw must be tightened Turn the machine with the rocker to see if its action meets the requirements before driving The machine must be kept clean It is strictly prohibited to have oil, liquid medicine or glass debris on the machine to avoid damage to the machine Therefore, the liquid medicine or glass debris must be removed in time during the production of the machine Clean all parts of the machine surface once before shift handover, and add clean lubricating oil to each activity department It should be scrubbed once a week, especially the places that are not easy to clean in normal use or blown with compressed air Precautions for syrup filling machine: after the machine is unpacked, first check whether the accompanying technical data are complete and whether the machine is damaged during transportation, so as to solve the problem in time Install and adjust the feed assembly and discharge assembly according to the outline drawing in this manual Apply new lubricating oil to each lubricating point Turn the machine with the rocker to check whether the machine is running in the correct direction (counter clockwise facing the motor spindle), and the machine must be grounded.