echemi logo
Product
  • Product
  • Supplier
  • Inquiry
    Home > Active Ingredient News > Drugs Articles > How to use the ultrasonic tumbler and matters needing attention

    How to use the ultrasonic tumbler and matters needing attention

    • Last Update: 2022-09-09
    • Source: Internet
    • Author: User
    Search more information of high quality chemicals, good prices and reliable suppliers, visit www.echemi.com
    The ultrasonic tumbling machine is composed of ultrasonic system, mechanical stirring system, refrigeration system and PLC automatic control electrical system
    .

    How to use the ultrasonic tumbler: 1.
    First open the exhaust valve of the interlayer tank, inject water into the interlayer tank from the water inlet until the water overflows, then turn on the switch of the circulating pump to see if the circulating pump is flowing, if not, turn it on The exhaust valve of the circulating pump is used to discharge the gas in the circulating pump to make the circulating pump work normally, and then add some water to the interlayer tank until the water is full
    .

    2.
    Set the panel parameters of the tumbler: (1) Setting of the rotation speed of the tumbler: adjust the rotation speed through the knob of the inverter, and the automatic screen display shows the rotation speed
    .

    (2) The adjustment range of the angle of the tumbling drum: 0°-90°, the manual screen on the display screen: press the angle +, each time increases by 5°; press the angle -, each time decreases by 5°
    .

    Pay attention to pressing the angle + or angle -, the speed should not be too fast or too frequently; the interval between each time should be more than 10 seconds
    .

    3.
    Vacuum system: Before starting the automatic work, check whether the lid of the tank is closed, whether the vacuum valve is closed, and whether the tank is under normal pressure.
    If the vacuum degree has been reached, put a little gas first, and then close the valve to ensure that the vacuum degree The state is not reached, otherwise the automatic process cannot be started
    .

    Note: The machine must be operated in strict accordance with the following instructions: 1.
    The leakage protection switch must be connected before the power supply! to ensure safety! 2.
    It is strictly forbidden to turn on the ultrasonic wave when the liquid is not filled with the interlayer tank, otherwise the machine will be damaged! Do not! 3.
    It is strictly forbidden to dismantle or overhaul the machine with power on! To avoid electric shock! 4.
    Please place the ultrasonic wave to work in a ventilated, dry and non-corrosive environment
    .

    This article is an English version of an article which is originally in the Chinese language on echemi.com and is provided for information purposes only. This website makes no representation or warranty of any kind, either expressed or implied, as to the accuracy, completeness ownership or reliability of the article or any translations thereof. If you have any concerns or complaints relating to the article, please send an email, providing a detailed description of the concern or complaint, to service@echemi.com. A staff member will contact you within 5 working days. Once verified, infringing content will be removed immediately.

    Contact Us

    The source of this page with content of products and services is from Internet, which doesn't represent ECHEMI's opinion. If you have any queries, please write to service@echemi.com. It will be replied within 5 days.

    Moreover, if you find any instances of plagiarism from the page, please send email to service@echemi.com with relevant evidence.