-
Categories
-
Pharmaceutical Intermediates
-
Active Pharmaceutical Ingredients
-
Food Additives
- Industrial Coatings
- Agrochemicals
- Dyes and Pigments
- Surfactant
- Flavors and Fragrances
- Chemical Reagents
- Catalyst and Auxiliary
- Natural Products
- Inorganic Chemistry
-
Organic Chemistry
-
Biochemical Engineering
- Analytical Chemistry
- Cosmetic Ingredient
-
Pharmaceutical Intermediates
Promotion
ECHEMI Mall
Wholesale
Weekly Price
Exhibition
News
-
Trade Service
Water-based wood lacquer
used on furniture surfaces, bonding well with substrates and forming a complete and tough protective film. Mainly used in wooden doors, furniture, cabinets and other wood material surface, not only to achieve decorative purposes, but also to protect the surface of the plate. So, wood paint construction technology what skills, furniture paint how to do? Next,
editor-in
will explain the details of
.
wood paint construction techniques
1, remove dust first. First of all, the wood surface polished flat, treatment of floating ash, cleaning can be used with a special dust cloth, large areas (such as ground version) with vacuum cleaner repeated vacuum.
2, varies by material. If it is hard wood, should be careful to use putty, foam water and other bottoming, so as not to cause color change and affect adhesion. Hard wood, want to get the best results, directly brush wood paint, if you need to fill the gap, it is recommended to use wood paint mixed with fine wood powder to fill evenly.
If the general wood, if necessary, with transparent putty to do substrate treatment, first with a scraper to evenly scrape the entire base, should be thin not thick, drying after grinding to be uniform, and to thoroughly polish off the surface attached to the wood excess transparent putty, so as not to cause paint disease.
3, coating grasp. Brushing wood paint should be thin not thick, can be thin coating multi-channel, do multi-layer coating construction, each brush should be left to the lower layer after drying construction, and every time to polish.
4, temperature-appropriate construction. When the temperature is below 5 degrees C, the drying time of wood paint will be extended, while the low temperature will produce white fog or lighting phenomenon, avoid direct sunlight or high temperature operation, high temperature wood paint dry faster, but also produce pinholes or bubbles, so should avoid construction in this case.
5, humidity grasp. When the ambient humidity is greater than 85%, it is not appropriate to construct, otherwise it is easy to produce paint film whitening and other ills.
the protection and decoration of furniture, in addition to the correct wood paint construction process is very important, wood paint quality is also very critical. Because, wood paint products are not only related to the beauty and comfort of the living environment, more importantly, related to the health of the family, can not be sloppy.
.