How white latex keeps warm in winter

White latex commonly known as white glue, latex, is the most commonly used water-soluble adhesive products in home decoration. Can be cured at room temperature, good initial viscosity, high bonding strength, mainly used for bonding porous wood material. Or add cement, putty powder, the preparation of mortar, as the inner wall putty batch scraping, good bonding, do not fall off the skin, can also greatly increase the strength of . Can also be used for carpentry board stitching, lines and trim panel bonding and many other aspects.
in the "golden nine silver ten" decoration season, the market demand for white latex will increase. But into October, the weather cools down, especially after the cold dew, the north has entered the winter, many Lingnan people also began to transition directly from short sleeves to suits and other jackets. The drop in temperature has put forward new requirements for the transportation, use and storage of white latex paint. How can white latex keep warm in winter?
, transport
white latex in the transport below 0 degrees C, we must pay attention to the vehicle to keep warm, -5 degrees C below the prohibited transport, heating measures are not effective.
1, heating truck transport
heating car has a heating function, transport can turn on heating to white latex heating.
2, ordinary car transport
can be laid in the carrier grass mat or warm, keep the temperature in the carrier above 0 degrees C.
2, construction
1, the construction temperature is best above 10 degrees C
ambient temperature of 5 degrees C, the construction environment temperature should be raised, closed doors and windows, to prevent the performance of white latex decline, 5 degrees C or less can not be constructed.
2, after freezing can be naturally thawed using
white latex icing do not stir, at room temperature environment, natural thaw, to be thawed and then stirred evenly, in good condition can be used normally. Avoid repeated thawing, otherwise it will reduce the bonding strength of the glue.
, storage
white latex warehouse temperature should be kept above 0 degrees C, to prevent the warehouse ventilation and temperature loss. White latex is stored below -3 degrees C for more than 20 hours, i.e. ice is frozen.
1, insulation room
conditional dealers and factories, can build insulation room, with heating and other heating equipment, to maintain indoor temperature above 5 degrees Celsius.
2, ordinary
ordinary warehouse to block strict windows, door hanging thick curtains, to prevent ventilation. At the same time with grass mats, insulation is covered with glue, warm and anti-freeze.
: White latex is a water-borne emulsion product, due to poor preservation caused by the product frozen quality problems, the use of the relevant responsibility.
。