-
Categories
-
Pharmaceutical Intermediates
-
Active Pharmaceutical Ingredients
-
Food Additives
- Industrial Coatings
- Agrochemicals
- Dyes and Pigments
- Surfactant
- Flavors and Fragrances
- Chemical Reagents
- Catalyst and Auxiliary
- Natural Products
- Inorganic Chemistry
-
Organic Chemistry
-
Biochemical Engineering
- Analytical Chemistry
- Cosmetic Ingredient
-
Pharmaceutical Intermediates
Promotion
ECHEMI Mall
Wholesale
Weekly Price
Exhibition
News
-
Trade Service
1 Scope
This standard specifies the requirements, sampling, test methods, marking, packaging, transportation and storage of a 30% aqueous solution prepared from trimethylamine
This standard applies to a 30% aqueous solution prepared from trimethylamine produced by the continuous gas phase catalytic amination of methanol .
Molecular formula: (CH 3 ) 3 N
Relative molecular mass: 59.
2 Reference standards
The provisions contained in the following standards constitute the provisions of this standard through quotation in this standard
GB190-1990 Dangerous Goods Packaging Mark
GB/T325-1991 Packaging Container Steel Drum
GB/T6678-1986 General Rules for Sampling of Chemical Products
GB/T6680-1986 General Rules for Sampling of Liquid Chemical Products
GB/T1250-1989 The method of expressing and judging the limit value
HG/T 2971-1999 Industrial Methylamine Aqueous Solution Test Method Railway Dangerous Goods Transportation Management Regulations Ministry of Railways Tieyun (1995) No.
3 requirements
3.
3.
Table 1 The quality requirements of industrial 30% trimethylamine aqueous solution%
4 sampling
4.
4.
4.
4.
4.
5 Test method
Measure according to HG/T2971
6 Marking, packaging, transportation and storage
6.
6.
6.
3 The products can be installed in carbon steel tank cars or steel drums
.
Tank trucks and steel drums must be clean and intact, and the packaging steel drums should be checked and accepted in accordance with GB/T325; after filling the drums, the lid should be tight and not leaking
.
6.
4 Trimethylamine is very volatile.
Steel drums containing this product should not be stored in the open air.
They should be stored in a dry, ventilated warehouse away from fire and other dangerous goods, and avoid high temperature exposure
.
6.
5 The transportation of this product should be carried out in accordance with the railway dangerous goods transportation management rules and other regulations related to the transportation of dangerous goods
.
7 Security
7.
1 This product is flammable, avoid high temperature exposure and contact with open flames
.
7.
2 This product is toxic and corrosive.
Avoid contact with eyes and skin during use
.
7.
3 This product should be stored separately from acid chemicals and strong oxidizing chemicals
.
Related link: Industrial 40% dimethylamine aqueous solution (Appendix A)