Industrial high and low temperature temperature control equipment start-up preparations

Industrial high and low temperature temperature control equipment is a refrigeration and heating temperature control equipment widely used in pharmaceutical, chemical, biological, new energy, semiconductor and other industries.
What preparations do users need to do when starting industrial high and low temperature temperature control equipment? Preparation before starting the industrial high and low temperature temperature control equipment 1.
Clean up the industrial high and low temperature temperature control equipment and the site before starting
.

There should be no corrosive gas and harmful impurities in the air, and no strong electromagnetic field interference around
.

Direct sunlight on the instrument should be avoided
.

2.
Check whether the ferrule or flange bolt of the external hose is tightened
.

3.
Power requirements: single-phase three-wire system or three-phase five-wire system (select the power supply specification for the corresponding model) with good grounding, and the grounding resistance is not greater than the specified ohm
.

 　　4.
Injecting circulating fluid: When using, the circulating fluid should be injected, and the injection amount of the circulating fluid should be kept away from the upper edge! To prevent foreign matter from clogging the pipeline, scaling, etc.
, use deionized water or circulating fluid
.

The water tank should be cleaned regularly, and the circulating fluid in the water tank should be replaced regularly to prevent the growth of microorganisms
.

(Different types of circulating fluids at different temperatures are different.
The fully closed circulating pipeline system adopted by Wuxi Guanya has certain advantages over the open type
.

) Industrial high and low temperature temperature control equipment, the refrigeration system has multiple overheating and overcurrent The protection device can be equipped with a high-temperature cooling function, which can quickly cool down at high temperatures to break the traditional high-temperature to low-temperature natural cooling mode
.

 　　Industrial high and low temperature temperature control equipment can provide users with a field source with controlled heating and cooling, uniform and constant temperature, which can be used for high and low temperature constant temperature tests at different temperatures, or temperature control processes for cooling and heating
.