-
Categories
-
Pharmaceutical Intermediates
-
Active Pharmaceutical Ingredients
-
Food Additives
- Industrial Coatings
- Agrochemicals
- Dyes and Pigments
- Surfactant
- Flavors and Fragrances
- Chemical Reagents
- Catalyst and Auxiliary
- Natural Products
- Inorganic Chemistry
-
Organic Chemistry
-
Biochemical Engineering
- Analytical Chemistry
- Cosmetic Ingredient
-
Pharmaceutical Intermediates
Promotion
ECHEMI Mall
Wholesale
Weekly Price
Exhibition
News
-
Trade Service
Industrial low-temperature water-cooled freezer is divided into air-cooled and water-cooled, industrial low-temperature water-cooled freezer is very useful, according to the compressor is divided into vortex-type industrial low-temperature water-cooled freezer and screw-type industrial low-temperature water-cooled freezer, according to temperature control is divided into low-temperature industrial low-temperature water-cooled freezer and normal temperature industrial low-temperature water-cooled freezer, can be used in pharmaceutical, but also in chemical industry.
-cooled industrial low-temperature water-cooled freezers need to be equipped with cooling towers, air-cooled industrial low-temperature water-cooled freezers do not need to be equipped with cooling towers.
Industrial low-temperature water-cooled freezer after a period of time, some products although the price is very low, but the quality can not be guaranteed, with a period of time there is a high pressure situation, industrial low-temperature water-cooled freezer pressure is too high for several reasons: cooling water temperature is too high, condenser cooling bad, refrigeration system lines are blocked, cooling system air, refrigerant filling excessive, want to repair the situation of excessive pressure, to be removed from this aspect, basically can find the problem.
If it is the condenser heat dissipation bad this situation, sometimes the compressor of the equipment is even high-voltage switch protection, this time the switch will jump off, the compressor stop running, poor heat dissipation high-voltage exceeds the standard and fault code or fault indication, this time should check whether the cooling tower circulating water is normal, or shut down restart can be normal operation.
cooling water temperature is too high, this problem, it is necessary to check whether the cooling tower is a failure, for example, the fan did not open or even reverse, the cloth waterer does not turn.
to solve the industrial low temperature water-cooled freezer pressure is too high, need to find professional and technical personnel to solve, because they are not professional and technical personnel, may be more time-consuming, and no good results.
if the industrial low temperature water-cooled freezer purchased from our company, any problems, you can contact customer service directly.