Industry standards such as water-based epoxy floor coatings will be implemented in April 2017

HG/T5057-2016 water-based epoxy floor coating

HG/T5058-2016 rail transit vehicle water-based damping coating

HG/T5059-2016 anticorrosive coating for offshore oil platform

HG/T5060-2016 Anticorrosive coating for liquefied natural gas (LNG) storage tank

HG/T5061-2016 automotive repair coating

HG/T5062-2016 Silver Mirror Mirror Back Coating

HG/T5063-2016 solvent-based polyurethane wood coating curing agent

This standard specifies the product classification, requirements, test methods, inspection rules, signs, packaging and storage of curing agents for solvent-based polyurethane wood coatings
.
This standard applies to diisocyanate monomers [such as toluene diisocyanate (TDI), hexamethylene diisocyanate (HDI), isophorone diisocyanate (IPDI), diphenylmethane diisocyanate (MDI), etc.
] and A compound rich in isocyanate groups (NCO) formed by addition polymerization or self-polymerization of polyhydroxy compounds is dissolved in an organic solvent in a certain proportion and used as a curing agent for various solvent-based polyurethane wood coatings
.

HG/T5064-2016 Flexible protective coating for bridge steel cable

This standard specifies the requirements, test methods, inspection rules, marking, packaging and storage of flexible protective coatings for winding bridge steel cables
.

This standard is applicable to flexible protective coatings on the outer surface of bridge steel cables, such as the outer surface of wire-wound bridges, and non-slip pedestrian passages
.

HG/T5065-2016 overcoat varnish for architectural coatings

This standard specifies the product classification, requirements, test methods, inspection rules, signs, packaging and storage of varnishes for architectural coatings
.

This standard applies to an acrylic resin varnish, silicone modified acrylic resin, urethane resin as the main film-forming material, and other additives were added, the water or solvent from the preparation
.
This product is mainly used for the surface of building interior and exterior wall coatings, which can improve the decorative and protective properties of the coating system
.

HG/T5066-2016 dispersant for water-based paint

This standard specifies the classification, technical requirements, test methods, inspection rules and labeling, packaging, transportation and storage of polycarboxylates and modified polymer dispersants such as polyacrylates
.

This standard applies to high molecular polymer dispersants synthesized from polyacrylates and other polycarboxylates and their modified products.
This product is mainly used for the dispersion and stabilization of pigments and extender pigments in water-based coatings, and can also be used for color pastes.
The dispersion and stability of the pigment
.

This standard does not apply to dispersants for water-based paints and color pastes containing nano-pigments and high-pigment carbon black, nor does it apply to dispersants for solid water-based paints
.

HG/T5067-2016 Waterborne Alkyd Resin for Coatings

This standard specifies the classification, requirements, test methods, inspection rules, marking, packaging and storage of water-based alkyd resins for coatings
.

This standard is applicable to water-based alkyd resins for coatings formed by condensation polymerization of polybasic acids and fatty acids (or oils) with polyhydric alcohols
.

This standard is also applicable to water-based alkyd resins for coatings modified to obtain specific properties.
Commonly used modifiers include rosin, phenolic resin, styrene, isocyanate, polyamide, acrylic, epoxy, or organic silicon compounds, etc.

.

HG/T5068-2016 Phosphorus Iron Powder Antirust Pigment for Coatings

This standard specifies the requirements, test methods, inspection rules, marking, packaging, transportation and storage of phosphorus iron powder antirust pigments for coatings
.

This standard applies to ferrophosphorus powder processed into powder
.
The products are mainly used in conductive coatings, high temperature resistant coatings, anticorrosive coatings and other coatings to enhance the anti-rust performance of the coatings
.

HG/T5069-2016 transparent iron oxide pigment

This standard specifies the product classification, requirements, sampling, test methods, inspection rules and signs, packaging, transportation and storage of transparent iron oxide pigment products
.

This standard applies to iron oxide pigments that can exhibit a transparent effect during application
.
Products are used in automotive coatings, wood coatings, electrophoretic coatings, can coatings and other fields
.

HG/T2456.
2-2016 Aluminum Pigment for Coating Part 2: Aluminum Powder

This part specifies the product classification, requirements, sampling, test methods, inspection rules and markings, packaging, and storage of aluminum powder
.

This section applies to aluminum powder produced by wet ball milling, drying and other processes using atomized aluminum powder, surface treatment agents and organic solvents
.
The products are mainly used in coatings, inks and plastics
.

HG/T2456.
5-2016 Aluminum Pigment for Coating Part 5: Water-based Aluminum Paste

This part specifies the requirements, sampling, test methods, inspection rules and markings, packaging, and storage of water-based aluminum paste
.

This part is applicable to treatment methods such as wet ball milling with atomized aluminum powder, surface treatment agents and organic solvents, and then coating with silicon-containing compounds or passivation of corrosion inhibitors to form a protective layer on the surface of flake aluminum particles to prevent Aluminum powder paste in which flake aluminum particles react with the medium
.
The products are mainly used in the field of water-based coatings
.