Installation and commissioning instructions of vacuum drying oven
-
Last Update: 2014-08-12
-
Source: Internet
-
Author: User
Search more information of high quality chemicals, good prices and reliable suppliers, visit
www.echemi.com
Installation and commissioning instructions of vacuum drying box: first, the installation of vacuum drying box shall be placed in a room with good ventilation conditions and no strong vibration, and inflammable and explosive materials shall not be placed around it II Close the commissioning box door and close the vent valve, and open the vacuum valve Connect the vacuum pump with the air extraction port with the air extraction pipe, connect the power supply of the vacuum pump and start the air extraction When the indicated value of the vacuum gauge reaches - 0.1MPa, first close the vacuum valve, then close the power supply of the vacuum pump (to prevent the back suction) At this time, the box is in the vacuum state If the heating function is not required, the vacuum tank commissioning is completed (3) connect the power supply of the vacuum drying oven, set the temperature controller to the required temperature, the digital display on the temperature controller is divided into two rows, the upper row shows the actual measured temperature, the lower row shows the set temperature, when the display temperature is close to the set temperature, the heating indicator will flash, the temperature control will enter the constant temperature state, and the vacuum drying oven works normally Shanghai Heheng Instrument Equipment Co., Ltd
This article is an English version of an article which is originally in the Chinese language on echemi.com and is provided for information purposes only.
This website makes no representation or warranty of any kind, either expressed or implied, as to the accuracy, completeness ownership or reliability of
the article or any translations thereof. If you have any concerns or complaints relating to the article, please send an email, providing a detailed
description of the concern or complaint, to
service@echemi.com. A staff member will contact you within 5 working days. Once verified, infringing content
will be removed immediately.