Instructions for the operation of the tabletop centrifuge

First, the profile desktop electric centrifuge has beautiful shape, large capacity, small size and complete
functions.

Its performance is stable, the speed can be adjusted and the balance can be automatically adjusted, the motor temperature rise is low, the use efficiency is high, and the applicability is wide
.

The product is suitable for qualitative analysis of serum, plasma and urea in pharmaceutical products, blood banks, clinical trials and biochemical laboratories; Production of isolated cells and the use
of large particles in the scientific and educational sector.

Second, before use instructions: 1, before using this product should read this manual
in detail.

2, the working environment temperature of the centrifuge is: 5-40 °C, the relative humidity should not exceed 80%, there is no conductive dust, explosive gases and corrosive gases
.

3, the workbench should be horizontal, stable, to prevent vibration, the workshop should be clean and tidy, dry and well
ventilated.

4.
Wipe the inner cavity and head head clean before starting
the machine.

5.
Before working, the empty centrifuge tube should be evenly placed and the machine should be run at a high speed of zui for 1-2 minutes, and no abnormal situation can be carried out normally
.

Third, the use of instructions: 1, according to the "instructions before use" to prepare for the work
.

2.
Put the weighed test tubes of consistent weight into the centrifuge hole and close the centrifuge cover
.

3.
Turn on the power, turn on the power switch, rotate the timing knob to turn on the machine
.

4.
Rotate the speed control button to the desired speed, 5, after the work, turn off the power supply and clean the whole machine
.

Fourth, note 1, do not touch the centrifuge head
that is running.

2.
It is strictly forbidden for the centrifugal head to run
in a state of unbalanced loading.

3.
Do not use in places where the sun shines
.

4.
The electrical rating parameters of the user's own power socket should be greater than the electrical rating parameters of the machine, and there should be good grounding
.

5.
Do not put the machine next to
the high temperature heating body.

6.
It is strictly forbidden to move the machine
under the condition of operation.

7.
Strong impact
is strictly prohibited.

8.
Before replacing the fuse, the plug should be unplugged
from the socket.

9.
Do not allow children to approach the machine
in use.