Instructions for use of electric Capping Machine

Brief introduction of electric Capping Machine: This product is a new capping machine developed by our company in recent years in response to the needs of the majority of users It is widely used in pharmaceutical, food, science education and other fields This machine has the characteristics of overload protection device, torque adjustment mechanism, forward and reverse conversion function, etc it selects the electronic watch at home and abroad as the driving element, which has the advantages of safe and reliable operation, long service life, simple maintenance, simple operation and use, high efficiency, superior performance, light structure and wide application Technical parameters of electric Capping Machine: applicable to cover (diameter) 10-50mm, output torque 0.6-6 (KGF Cm), working power 7W, voltage 220V, boundary dimension 180 × 110 × 95mm, applicable head handle (diameter) 10-50mm Manual of electric Capping Machine: 1 Operation steps: 1 Connect the power cord of capping machine with the power box; 2 Connect the power supply and the indicator light of power box will be on; 3 Buckle the bottle cap on the bottle mouth with the left hand; 4 Hold the bottle body of the capping machine with the left hand; 5 Hold the capping machine with the right hand and align it with the cap vertically; 6 Press the start switch on the capping machine with the right index finger and press down at the same time, Until the automatic clutch of the capping machine sends out "dada..." According to the tightness of the screw cap, the screw cap head does not need to be pressed too tight 7 The adjustment of the tightness of the bottle cap can be achieved by adjusting the torque between the screw head and the screw machine The larger the torque is, the tighter the screw cap is, the smaller the torque is, and the looser the screw cap is 2、 Caution 1 This machine is forbidden to be used in the environment with combustible gas 2 The machine shall not be stored and reused in humid, corrosive gas and high dust environment 3 In use, it is not allowed to change the rotation direction constantly, so as to avoid damaging the motor and reducing the service life If you want to know more about electric Capping machine, please log in our company: < or direct Pharmaceutical Technology Department: < for consultation, our factory will provide you with more professional services!