echemi logo
Product
  • Product
  • Supplier
  • Inquiry
    Home > Active Ingredient News > Drugs Articles > Instructions for use of the reactor temperature control device

    Instructions for use of the reactor temperature control device

    • Last Update: 2022-08-19
    • Source: Internet
    • Author: User
    Search more information of high quality chemicals, good prices and reliable suppliers, visit www.echemi.com
    If the reactor temperature control device is used, the instructions and related materials must be carefully read before use, and the structural principle, performance indicators, operating procedures, maintenance and related precautions must be carefully mastere.
    Before using the reactor temperature control device equipment, please carefully check whether the connection between the equipment and the external wiring (parts) is correct and normal, check whether the power plug is inserted correctly, whether the voltage, frequency and indicator meet the equipment requirements, and check the equipment is in a normal stat.
    The liquid medium must be added to the temperature control device of the reactor before use, otherwise the heater will be damaged when the heater is energized, and the liquid level of the medium should be lower than the level of the workbenc.
    After turning off the refrigeration switch of the reactor temperature control device, the refrigeration switch should be turned on again every 10 to 20 minutes (depending on the ambient temperature.
    If the water, electricity or gas supply fails or is interrupted during the experiment, the relevant switches affecting the reactor's thermostatic equipment should be turned off immediately and protective measures should be take.
    The temperature control device of the reactor should be placed in a dry and ventilated place, and there should be no obstacles within 300mm around the instrumen.
    When the working temperature of the reactor temperature control device is low, care should be taken not to enter the water tank to prevent frostbit.
    After use, all switches are turned off and power is cut off, and the reactor's thermostatic equipment should be cleaned regularly to keep work surfaces and operating panels tid.
    The maintenance and maintenance of the temperature control device of the reactor is the basic requirement of a good thermostat tes.
    The maintenance and maintenance of the reactor thermostat equipment is related to the integrity rate, utilization rate and experimental teaching rate of the reactor thermosta.
    Experiment success rat.
     
    This article is an English version of an article which is originally in the Chinese language on echemi.com and is provided for information purposes only. This website makes no representation or warranty of any kind, either expressed or implied, as to the accuracy, completeness ownership or reliability of the article or any translations thereof. If you have any concerns or complaints relating to the article, please send an email, providing a detailed description of the concern or complaint, to service@echemi.com. A staff member will contact you within 5 working days. Once verified, infringing content will be removed immediately.

    Contact Us

    The source of this page with content of products and services is from Internet, which doesn't represent ECHEMI's opinion. If you have any queries, please write to service@echemi.com. It will be replied within 5 days.

    Moreover, if you find any instances of plagiarism from the page, please send email to service@echemi.com with relevant evidence.