Introduction of cleaning method of liquid filling machine

Because the liquid filling machine is filled with liquid, and many of the liquid have a certain degree of corrosion Therefore, the liquid filling machine must be kept clean, and the filling containers used must be strictly inspected and cleaned, so as not to contaminate the filled drinks; it is also necessary to keep the filling workshop clean and tidy after Zui In the process of production, Zui, the beverage manufacturer, taboos that the production line cannot operate normally due to the quality problems of the filling machine itself Therefore, when using the filling machine, attention should be paid to sterilization to ensure clean and low-temperature filling The main methods to ensure the cleanness are: keep the pipeline of liquid filling machine clean, all pipelines, especially those in indirect or direct contact with the materials, shall be kept clean, washed every week, drained every day and sterilized every time; ensure that the filling machine is clean, and the material tank shall be washed and sterilized to ensure that the parts in contact with the materials are free of scale and bacteria In the process of production, it is a good method to ensure the biological stability of bottled drinks It is necessary to control the sterilization time and temperature to ensure the final effect of Zui It is also necessary to avoid too long sterilization time or too high temperature to reduce the oxidation of drinks After sterilization, it is necessary to cool down as soon as possible so that the temperature does not exceed 35 ℃ Low temperature filling is a low requirement for beverage filling Zui Under normal circumstances, the beverage is not easy to foam in low temperature environment, and is conducive to filling Before each operation of the filling machine, use 0-1 ℃ water to reduce the temperature of the filling machine tank and the conveying pipeline When the filling temperature exceeds 4 ℃, lower the temperature first and then carry out the filling operation Use the heat preservation tank and constant temperature irrigation to keep the material at a certain constant temperature within the specified filling time, so as to avoid the unstable operation of the filling machine due to the excessive temperature change In addition, the filling equipment Zui shall be well isolated from other equipment The lubrication part of the filling machine and the filling material part shall prevent cross contamination The lubrication of the conveyor belt shall use special soap water or lubricating oil