Introduction to an instrument for testing the tensile and compressive properties of springs

TLS-5 liquid crystal display spring testing machine host and assistive device design integrates our company's advanced technology, beautiful appearance, easy operation, stable and reliable
performance.

The system through the digital controller, through the speed regulation system to control the digital motor rotation, through the deceleration system deceleration through the precision lead screw secondary belt beam rises, descends, complete the specimen tensile, compression and other mechanical properties test, no pollution, low noise, high efficiency, with a wide range
of speed regulation.

This machine is developed according to the requirements specified in the spring testing machine standard
.

It is mainly used to test various coil spring mechanical performance indicators
.

Main function 1, set the test force P, detect the deformation amount of the spring F
.

2.
Set the deformation amount F, and test the test force of the spring P
.

3.
5 detection points
can be set.

4.
The test force, displacement and stiffness are displayed digitally and the test results are printed, which can test the initial tensile force
.

5.
It has the functions
of peak holding, overload protection, displacement and test force arbitrary zeroing, stiffness calculation, test speed 0.
2-500mm/min arbitrary settings, data query, data printing and so on.

6, the use of CNC motor dragging, lead screw loading
.

Main technical indicators 1, larger test force: 5000N2, measurement range: 2% - 100% of the larger test force 3, test force accuracy: better than the ± 1% of the indicated value 4, displacement measurement: resolution of 0.
01mm5, deformation accuracy: better than ±1%6, speed regulation range: 0.
2-500mm/min7, testing machine beam displacement larger distance: 600mm8, compression test plate between the increase distance: 600mm9, Upper and lower pressure plate diameter: 100mm10, main machine form: single-column frame structure 11, host size: 560×420×1200mm12, weight: about 150Kg13, power supply voltage: 220V 50HZ14, working environment: room temperature ~ 45 °C, humidity 20% ~ 80% Main functions and characteristics: 1, the speed regulation system adopts stepper motor to drive the synchronous belt deceleration structure, stable and reliable performance, with overcurrent, overvoltage, overload and other protective devices
.

2.
Adopt stepper motor loading and control, realize two-speed placement, high-speed approximation, and slow-speed acquisition to improve experimental accuracy and reliability
.

3.
The transmission part adopts circular arc synchronous toothed belt, precision lead screw secondary transmission, stable transmission, low noise and high
transmission efficiency.

4, touch jian operation mode, real-time display of liquid crystal display, to overcome the problem of old-fashioned digital tube display prone to failure, and beautiful and generous, convenient and fast
.

Label:spring testing machine