Introduction to the commissioning of small liquid filling machine

1, first loose the nut and adjust the screw so that the position of the lower fixed rod will change accordingly Thus, the push-pull length of the syringe is also changed to achieve the purpose of free adjustment of the sub loading capacity The screw is adjusted to increment clockwise, otherwise, the decrement is made, and the pointer has indication Use 5ml syringe, look at the side marked with 5ml, look at the side marked with 10ml syringe, and directly look at the scale and pointer quantitative measurement for 20, 100 and 500 types However, due to the different thickness of each syringe, there is an error in the actual sub loading volume Take the scale of syringe as the standard, or use a cup to measure Zui at the beginning of sub loading 2 Tighten the nut immediately after adjustment to make the lower fixing rod and crank firmly fixed 3 Loosen the nut, and determine the correct position of the upper fixing rod according to the push-pull length of different syringes After the lower fixing rod is adjusted, turn the crank to make the syringe turn to the upper dead center, and then lift the syringe outer tube up about 2mm to prevent the needle tube from being broken After the nut is tightened, the machine can be started 4 After the machine is assembled correctly, turn on the switch When the machine is working, the crank drives the syringe to pull up and down to extract liquid, adjust the speed knob, select the appropriate sub loading speed, start normal operation, adjust the governor knob, and the sub loading speed is fast clockwise, otherwise slow.