Inventory of propylene oxide projects under construction in 2021 (excluding the start of construction in 2021)

Taixing Yida 150,000 tons/year HPPO propylene oxide project

At present, the device has been completed, and is currently in the process of review and acceptance.
It is expected that it will be put into production before a year
.
The total investment of the project is 1.
025 billion yuan.
The main products include 150,000 tons of propylene oxide, 180,000 tons of hydrogen peroxide (60%), 2,095 tons of propane, and 4,000 tons of propylene glycol ether
.

Tianjin Petrochemical 150,000 tons/year CHP method propylene oxide project

The construction will start in July 2020, using the CHP process technology for producing propylene oxide jointly developed by Shanghai Petrochemical Research Institute, Sinopec Shanghai Engineering Co.
, Ltd.
, Tianjin Petrochemical Company, and Qingdao Security Engineering Institute
.
After the project is completed and put into operation, Tianjin Petrochemical will open up the entire industrial chain of "propylene-propylene oxide-polyether", which can make full use of the branch's propylene resources to provide raw materials for polyether units, so as to give full play to the overall competitive advantages of upstream and downstream units
.
It is reported that the project is expected to be handed over on September 30, 2021, and will be completed and put into operation by the end of 2021
.

Binhua 300,000 tons/year PO/TBA propylene oxide plant

The project is located in Lingang Chemical Industrial Park, Binzhou, Shandong.
It belongs to the second phase of the company's C3 comprehensive utilization project, including an annual output of 300,000 tons of propylene oxide and a co-production of 780,000 tons of tert-butanol.
It will start in August 2020 and the construction period is expected.
will be two years
.
The technology used is the first domestically developed co-oxidation technology
.

Wanhua Chemical 30/650,000 tons/year PO/SM plant

The total investment is 3.
25 billion yuan, and a 300,000-ton/year propylene oxide co-production 650,000-ton/year styrene unit will be built using the ethylbenzene co-oxidation method to produce propylene oxide
.
On October 23, the device has been handed over
.
According to Sinopec Yuan, the project was designed by Sinopec Engineering Construction Co.
, Ltd.
(SEI) and is the first PO/SM device independently developed in China
.