-
Categories
-
Pharmaceutical Intermediates
-
Active Pharmaceutical Ingredients
-
Food Additives
- Industrial Coatings
- Agrochemicals
- Dyes and Pigments
- Surfactant
- Flavors and Fragrances
- Chemical Reagents
- Catalyst and Auxiliary
- Natural Products
- Inorganic Chemistry
-
Organic Chemistry
-
Biochemical Engineering
- Analytical Chemistry
- Cosmetic Ingredient
-
Pharmaceutical Intermediates
Promotion
ECHEMI Mall
Wholesale
Weekly Price
Exhibition
News
-
Trade Service
The constant temperature oscillating incubator has a wide range of uses.
It has been highly evaluated in scientific research such as environmental protection, medical teaching, health and epidemic prevention, drug inspection, zoology and botany, marine science and food engineering.
The most used is the rotary constant temperature shaking incubator, which can mix the liquid quickly or dynamically cultivate at a speed of 250 times per minute
.
This is the shaking effect of the rotary constant temperature shaking incubator
.
The reciprocating constant temperature shaking incubator is a left and right shaking type.
This shaking method can be well used in high viscosity liquids, because when the high viscosity liquid is shaken by the rotating constant temperature shaking incubator, it is not easy to form a vortex.
However, the shaking effect of the reciprocating constant temperature shaking incubator is different.
For example, using a large amplitude reciprocating constant temperature shaking incubator, the effect is more obvious
.
It is better to purchase a constant temperature shaking incubator is a rotary or reciprocating type, which should be determined according to the viscosity of the culture liquid
.
Maintenance of constant temperature shaking incubator 1.
Correctly use and pay attention to the maintenance of the instrument to keep it in good working condition and prolong the service life of the instrument
.
2.
During the continuous operation of the instrument, regular inspections should be carried out every three months; check the fuses, control components and fastening screws, and whether water droplets, dirt, etc.
fall on the motor and control components
.
3.
The bearings of the transmission part have been filled with an appropriate amount of grease (No.
1 calcium-nanobase) before leaving the factory.
During the continuous operation of the instrument, the grease should be filled every six months, and the filling amount accounts for about 1 of the bearing space.
/3
.
4.
The instrument is used regularly, and natural wear and tear is a normal phenomenon
.
After the instrument has been used for one year, if it is found that the motor and compressor have abnormal noise; the bearing of the transmission part is worn, the belt is loose or cracked, the electronic control element fails, etc.
, the company will continue to provide services and assist in handling
.
5.
The compressor should avoid continuous starting
.
It has been highly evaluated in scientific research such as environmental protection, medical teaching, health and epidemic prevention, drug inspection, zoology and botany, marine science and food engineering.
The most used is the rotary constant temperature shaking incubator, which can mix the liquid quickly or dynamically cultivate at a speed of 250 times per minute
.
This is the shaking effect of the rotary constant temperature shaking incubator
.
The reciprocating constant temperature shaking incubator is a left and right shaking type.
This shaking method can be well used in high viscosity liquids, because when the high viscosity liquid is shaken by the rotating constant temperature shaking incubator, it is not easy to form a vortex.
However, the shaking effect of the reciprocating constant temperature shaking incubator is different.
For example, using a large amplitude reciprocating constant temperature shaking incubator, the effect is more obvious
.
It is better to purchase a constant temperature shaking incubator is a rotary or reciprocating type, which should be determined according to the viscosity of the culture liquid
.
Maintenance of constant temperature shaking incubator 1.
Correctly use and pay attention to the maintenance of the instrument to keep it in good working condition and prolong the service life of the instrument
.
2.
During the continuous operation of the instrument, regular inspections should be carried out every three months; check the fuses, control components and fastening screws, and whether water droplets, dirt, etc.
fall on the motor and control components
.
3.
The bearings of the transmission part have been filled with an appropriate amount of grease (No.
1 calcium-nanobase) before leaving the factory.
During the continuous operation of the instrument, the grease should be filled every six months, and the filling amount accounts for about 1 of the bearing space.
/3
.
4.
The instrument is used regularly, and natural wear and tear is a normal phenomenon
.
After the instrument has been used for one year, if it is found that the motor and compressor have abnormal noise; the bearing of the transmission part is worn, the belt is loose or cracked, the electronic control element fails, etc.
, the company will continue to provide services and assist in handling
.
5.
The compressor should avoid continuous starting
.
