It is also important to clean the small swing granulator after use

The mechanism of small swing granulator is forced extrusion The drum is a hexagonal drum on which a "scraper" with trapezoid section is fixed With the help of the squeezing and shearing effect of the scraper on the wet material when the drum rotates alternately in the positive and negative directions, the material is extruded into particles through the screen with different mesh numbers Cleaning standard operating procedures (1) cleaning conditions and frequency: ① cleaning once after each variety; ② cleaning once after each shift production (2) detergent and disinfectant: drinking water, purified water, 75% alcohol solution   (3) cleaning methods (first remove and then wash, first inside and then outside): ① unscrew the baffle screws and rotary drum screws on both sides of the granulator, draw out the screen clamp pipe, and take down the baffle, screen and rotary drum; ② move the removed rotary drum, screen clamp pipe and its accessories to the cleaning room, remove the residue on the surface of the rotary drum with an organic glass blade, wash with drinking water, and wipe the dead corner with a rag Replace with purified water for washing, and then use a cloth dipped with 75% ethanol to wipe the inner and outer walls of the rotary drum and the screen clamp tube for disinfection and natural drying; ③ use a cloth dipped with drinking water to wipe the parts in direct contact with the medicine, such as hopper and baffle, to remove the visible residues on the surface; ④ replace with purified water to wipe the above parts; ⑤ use a cloth dipped with 75% ethanol for disinfection after Zui, Natural drying; ⑥ wipe the external part of the equipment with a cloth dipped in drinking water, install the rotating drum, screen clamp, baffle and other parts, and dry naturally; ⑦ clean the site, hang the equipment cleaning qualification status mark after passing the inspection, and fill in the equipment cleaning record (4) qualification standard and inspection method of small swing granulator: wipe the rotating drum, feeding hopper, screen clamp, baffle and other parts with clean white rag, which shall be free of color spots, stains, residue marks, and the whole machine shall be bright and clean (5) small swing granulator Cleaning tools and their management: ① cleaning tools: rags (non-woven fabric), plexiglass blades, buckets; ② cleaning tools after use should be cleaned in time, the buckets should be cleaned after use, and stored upside down; after use, the rags should be washed with washing powder, then washed with purified water, dried and put into clean plastic bags; ③ cleaning tools should be stored in a special cleaning room, and cleaning tools in each area should be placed separately The cleaning tools should be disinfected once a week.