Japan's Yukawa electric appliances show thin coating technology to achieve the appearance of plastic metal

China Paint Online News:
Yuchuan Electric (Headquarters: Yokohama City) Plastics Division in "Product Manufacturing Partner Forum 2016" (Sponsored: Nikkei Manufacturing, November 24, 2016 On the 5th, at the International Hall in Tokyo, a metal-plated and bent or dented part of a soft resin (NBR, butyl rubber) was exhibited, which, although made of resin, creates a metallic high-grade feel. Relevant technologies have been applied in cosmetic packaging. Manufacturing first on the NBR molding products to do pre-treatment and special bottom coating, and then the implementation of the steaming process, and paint for external decoration., Yuchuan Electric also exhibited a sample of the car's pattern on the buttons and handles of electrical products using hard resin (Figure 1). Manufacturing first in the resin part surface to form a height of about 0.05mm congenial round (car pattern) bump pattern, and then through primer, metal vaporting and paint process to complete. Originally there is the possibility that the coating film is too thick, the car pattern is sealed, and this time through the development of thin coating technology, to achieve the same level of performance as metal.
addition, Yukawa Appliances introduces techniques for creating soft textured resin components by embedding them using films and fabrics (Figure 2). Just simply embed the film and so on to form, forming aggregated folds, many times can not get good results. Therefore, the company has developed a film and other lining resin one-time molding, the implementation of embedded molding technology.
。