KL2532 bus terminal module, 2-channel motion interface, DC motor

The KL2532 bus terminal module can run two DC motors
directly.
It is galvanically isolated
from the K-bus.
The speed is preset
by a 16-bit value of the automation unit.
The output stage is overload and short-circuit protected
.
The bus terminal module contains two channels
that indicate its signal status by means of a light-emitting diode.
LEDs enable fast local diagnostics
.
ProductsInformation Technology Data AccessoriesSoftware Documentation and Download Beckon Information System Application NotesAdditional ProductsRelated Product Technical Data Housing Data Reaching the Apex Technical Data KL2532, KS2532 TechnologyCompact Drive TechnologyLoad TypeDC Brushed Motor, Number of Inductive Channels2Output Number per Channel 1 DC Motor Input Number per Channel 1 End Position Connection
TechnologyMotor Direct Connection Output CurrentMaximum Connection.
1 A maximum
per channel.
Output current 2 x 1 A (both channels are short-circuit protected and thermally overload-protected) for maximum
resolution.
10-bit current, 16-bit speed encoder input signal – pulse frequency – typical current
consumption power contacts.
30 mA + load current consumption K-bus type
.
Bit width in 50 mA process image48 inputs/outputs: 2 x 16-bit data, 2 x 8-bit control/status galvanically isolated 500 V (K-bus/field potential) weight approx.
55 g Operating / storage temperature0.
.
.
+55 °C/-25.
.
.
+85 °C relative humidity95 %, non-condensing vibration/shock resistant according to EN 60068-2-6/EN 60068-2-27EMC immunity/radiation according to EN 61000-6-2/EN 61000-6-4 Protection
.
Rating/Installation PositionIP20/See Document Pluggable wiring for all KSxxxx Bus terminals approval/marking CE, UL Technical data Housing data arriving at the apex Housing data KL-12-8pinKS-12-8pin Design form Compact terminal housing with pluggable wiring levelMaterialpolycarbonateDimensions (W x H x D)12 mm x 100 mm x 68 mmInstallationon 35 mm DIN rail, conforming to EN 60715 with lockSide by side mounting by means ofdouble slot and key connectionMarkinglabeling of the BZxxx seriesWiringsolid conductor (e), flexible conductor (f) and ferrule (a): spring actuation by screwdriverConnection cross-sections*: 0.
08.
.
.
2.
5 mm²,st*: 0.
08.
.
.
2.
5 mm²,f*: 0.
14.
.
.
1.
5 mm²s*: 0.
08.
.
.
1.
5 mm²,st*: 0.
08.
.
.
1.
5 mm²,f*: 0.
14.
.
.
1.
5 mm²Connection cross-section AWGs*: AWG 28.
.
.
14,st*: AWG 28.
.
.
14,f*: AWG 26.
.
.
16s*: AWG 28.
.
.
16,st*: AWG 28.
.
.
16,f*: AWG 26.
.
.
16Stripping length8.
.
.
9 mm9.
.
.
10 mmCurrent load power contactsImax: 10 A