Knowledge of the day-to-day maintenance of microprocessor chip test devices.

Since the microprocessor chip test device is basically composed of electrical, refrigeration and mechanical systems, the entire equipment system should be examined and analyzed in a face-to-face way in the event of a problem with the equipment.
microprocessor chip test units generally recommend that you place them at temperatures of 8 to 28 degrees C, and that laboratories that do not have this condition be equipped with appropriate air conditioners.
microprocessor chip testing device adhere to professional management and maintenance, conditional units should be sent from time to time to the supply factory training and learning, in order to obtain more professional maintenance, maintenance experience and ability.
is fixed every 3 months to clean the condenser, for the compressor using air-cooled cooling, should regularly repair the condenser and the condenser to remove dirt to ensure its good ventilation and heat exchange performance.
For compressors with water-cooled cooling, in addition to ensuring its in-water pressure and in-water temperature, the corresponding flow must be guaranteed, and the condenser internal cleaning and descaling on a regular basis to obtain its continuous heat exchange performance.
regular cleaning microprocessor chip test device evaporator: due to the cleanliness of the test products, under the forced wind circulation of the evaporator will condense a lot of dust and other small particles of objects, should be cleaned regularly.
Cycle air leaves, condenser fan cleaning and balance and cleaning evaporator is similar, because the working environment of the test box is different, circulating air leaf and condenser fan will condense a lot of dust and other small particles of objects, should be cleaned regularly.
microprocessor chip test device water and humidifier cleaning: if the water is not good, humidifier fouling can easily lead to dry burning humidifier, may damage the humidifier, so the water and humidifier must be cleaned regularly.
microprocessor chip test device insists on setting the temperature near the ambient temperature after each test, working for about 30 minutes before cutting off the power supply and wiping the walls of the work room.
long-term shutdown should be regularly every half a month to power the product, power time is not less than 1 hour.
.