Knowledge of the use of explosion-proof small high and low temperature cycle devices

The main purpose of the explosion-proof small high and low temperature circulation device is to use in conjunction with the reactor, which can provide heat and cold sources.
Cold source can also be used for heating and cooling of other equipment
.

1.
Before installation, use, maintenance and inspection, be sure to read all the contents of the manual carefully and use it correctly
.

2.
The power supply voltage must be consistent with that specified by the instrument
.

3.
The life of the electrical box is greatly affected by the surrounding temperature
.

Please keep the motor of the explosion-proof small high and low temperature cycle device dry
.

　　4.
Install the machine first, then wire it by a professional electrician, and energize it
.

The ground terminal must be grounded
.

　　5.
Within 5 minutes of cutting off the power supply of the explosion-proof small high-low temperature cycle device, there may still be electric shock due to the discharge of the inverter or capacitor
.

　　6.
Pay attention to the impact damage to the equipment by hard objects (watches, rings, belt buckles, etc.
) on the body during operation
.

　　7.
Pay attention to the high temperature cycle, you should open the circulating pump first, and let the heat transfer oil circulate, and slowly heat up
.

The explosion-proof small high and low temperature circulation device is divided into 2 systems: refrigeration system and heating system.
The 2 systems can be used continuously or separately.
The entire liquid cycle is a fully closed system.
The heat transfer fluid is not easy to volatilize and oxidize at high temperature, and it is not easy to absorb at low temperature.
The moisture in the air prolongs the service life of the heat transfer fluid.
The whole process of heating and cooling does not require oil changes to cool down.
The constant temperature is fast.
The temperature can be continuously raised and lowered.

.