Light aggregate ceramsite particle belt dryer 3t/h

Lightweight aggregate ceramsite particle belt dryer 3t/h equipment requirements 1: Indirect drying equipment, material: lightweight aggregate ceramsite particle, extrusion granulation particle size 15~20mm, the material is volatile VOC, and the material initially contains water The drying rate is 20-25%, the initial temperature is 4°C, the moisture content after drying is 12%, the temperature after drying is 100°C, the drying water volume is 3t/h, the material handling capacity is 25~30t/h, the heat medium: thermally conductive mineral oil, The oil temperature is 290°C, the oil outlet temperature is 270°C, and the material damage rate is required to be low.
Equipment requirement 2: belt dryer, ceramsite particles after indirect drying of materials, kiln temperature 100°C, moisture content 10%, particle size 15 ~25mm, moisture content after drying is 2%, drying water volume is 3t/h, material handling capacity is 20~30t/h, heat medium: high temperature exhaust gas temperature 350℃, belt dryer working temperature 300℃, the equipment is required to run stably , The work efficiency is guaranteed.
Equipment needs 3: Fluidized bed dryer, processing capacity 25~30t/h, material particle size 15~20mm, working temperature 300℃